4

Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.

The temperature range for camera use is -10°C to 40°C (32°F to 104°F).

The monitor may appear black under high temperatures, but will return to normal as temperatures normalize.

The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a fault.

Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, removing the camera after temperature of the camera and surroundings are equalized.

Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These could cause a camera breakdown. Wipe dry any rain or water drops on the camera.

Please do not press forcefully on the monitor. This could cause breakage or malfunction.

Be careful not to over tighten the tripod screw when using a tripod.

Cleaning Your Camera

Do not clean the product with organic solvents such as thinner or alcohol benzene.

Use a lens brush to remove dust accumulated on the lens or viewfinder. Never use a spray blower for cleaning as it may damage the lens.

Please contact PENTAX Service Center for professional cleaning of the CMOS sensor. (This will involve a fee.)

Storing Your Camera

Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera. Remove from the case and store in a dry and well-ventilated location.

Other Precautions

Periodic inspections are recommended every one to two years to maintain high performance.

Refer to “Precautions When Using the SD Memory Card” (p.50) regarding the SD Memory Card.

Please note that deleting the data recorded on an SD Memory Card or formatting an SD Memory Card using a camera or computer will not necessarily delete the data so that they cannot be recovered using off the shelf data recovery software. Such data should be handled and managed at your own risk.

Regarding Product Registration

In order to better serve you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or on the PENTAX website. Thank you for your cooperation.

Refer to the provided “Quick Guide” for more information.