Manuals / Brands / Lawn and Garden / Telescope / Pentax / Lawn and Garden / Telescope

Pentax R-315(N), R-325(N), R-326 4, [Battery & Charger], [Auto focus], [LD POINT, Laser pointer]

1 91

Download 91 pages, 964.1 Kb

4

PRECAUTIONS REGARDING SAFETY

eThere is a possibility that synthesized values are calculated and the distance

may become longer or shorter than the actual one when the operator

measure the target of slope or sphere or rugged shape.

rThere is a possibility that the instrument cannot calculate correctly by

collecting the reflected laser beam from a man or a car that comes and goes

in front of the target.

●When using Reflector sheet, set the Reflector sheet to have its surface be

approx. ver tical to the aiming line. If it is positioned not to be approx.r ight

angle, there is a possibility that correct distance measurement may be

impossible by dispersion or reduction of laser beam.

[Battery & Charger]

●Never use any battery charger other than the BC03 battery charger as this

may result in damage to the instrument.

●If water should happen to splash on the instrument or the battery, wipe it off

immediately and allow it to dry in a dry location. Do not put the instrument in

the case until it is completely dry as this may result in damage to the

instrument.

●Turn off the power when removing the battery from the instrument as

removing the battery while the power is still on may result in damage to the

instrument.

●The battery mark displayed on the instrument is only an estimate of remaining

battery power and is not completely accurate. Replace the batter y quickly

when it is about to run down as the time a battery lasts on one charge differs

depending on conditions of ambient temperature, and the measurement mode

of the instrument.

●Confirm the battery level remaining before operating.

[Auto focus]

The Auto focus mechanism is very precise but will not function under every

condition. Focusing depends on brightness, contrast, the shape and size of the

target.

In such a case, press the AF button and focus on the target by operating the

Power focus key or the AF ring.

[LD POINT, Laser pointer]

When you make a correct direction using the “LD POINT”, aim the laser beam at

the wall and mark the center and then confirm the discrepancy between the

reticle center and the marked point beforehand.

PENTAX R-300 (p01-19) 10/30/02 11:20 AM Page 4

Contents

Main Safety Precautions (Must be followed) CAUTION Page Ni-MH CAUTION 3 Usage Precautions [Solar Observation] [Laser Beam] [EDM axis] 4 [Battery & Charger] [Auto focus] [LD POINT, Laser pointer] 5 [Storage and Operating Environment] [Transporting and Carrying the Instrument] [Checks and Repairs] Page Page Page 1 BEFORE USING THE INSTRUMENT 1-1 Names of Parts 1 BEFORE USING THE INSTRUMENT R-325(N)/R-322(N)/R-323(N): Detachable type Page 1-2 Unpacking and Packing Unpacking the Instrument from the case Packing the Instrument in the case 1-3 Standard equipment 11 1-4 Attaching and Charging the Battery Page 14 [Detaching the battery] [Display panel] Page 2 DISPLAY AND KEYBOARD 2-1 Display and Keyboard 2-2 Operation Key Key Description 2 DISPLAY AND KEYBOARD 2-3 Function Key Display F.Key Description Mode A Mode B Other functions 18 2 DISPLAY AND KEYBOARD [How to move the menu number] Example: The cursor is located at Menu 1. Press the numeric key 0 and 2 to move to Menu 2 or press [F4] [h]. 2-4 Alphanumeric Input 2-5 LD POINT, Laser Pointer 20 3 PREPARATION FOR SURVEYING 3-1 Centering and Leveling of the Instrument Setting up the instrument and the tripod 3-2 Laser plummet Laser plummet model 21 [For the Shift type laser plummet equipment model] [Brightness adjustment of laser] 22 3-3 Optical plummet (Option) [Detachable type] [Shift type] 23 3-4 Leveling with Circular vial 3-5 Leveling with Electronic vial [Electronic vial screen] [Leveling] 24 25 3-6 Eyepiece Adjustment Eyepiece adjustment 3-7 Target Sighting Page [Auto focus :Target sighting by Normal mode] 28 [Auto focus :Target sighting by Continuous mode] 29 [Auto focus :Target sighting by Power focus mode] 30 [Target sighting by Manual focus] 31 3-8 Attachment and Detachment of Tribrach Detachment Attachment 32 33 4 TURNING THE POWER ON 4-1 Turning the Power On and Off H. angle 40"39'85 H. dst. 0000000 V 4-2 Adjusting LCD Contrast 34 H. angle 40"39'85 H. dst. 0000000 V 4-3 Adjusting Illumination Brightness 4-4 Adjusting Reticle Illumination 40"39'85 35 H 5 ANGLE MEASUREMENT 5-1 Measuring an Angle 5-2 Resetting the Horizontal Angle to 0 5-3 Holding the Horizontal Angle 37 H. angle 00"00'0 H. angle 20"45'130 5-4 Inputting an Arbitrary Horizontal Angle In case of Horizontal angle 12345' 20" input Press [F5] [MODE] to enter mode B. 5 ANGLE MEASUREMENT 39 H. angle 20"45'123 5-5 Displaying the % Slope of the Vertical Angle 40 5-6 Changing the Horizontal Angle from Clockwise to Counterclockwise 41 H. angle 40"29'-267 6 DISTANCE MEASUREMENT 6-1 Target Setting V 42 Page 44 6-2 Distance Measurement V 45 V 7 CORRECTION MODE 7-1 Changing the Target Constant Page 7-2 Changing the Temperature Page 7-3 Changing the Atmospheric Pressure Page 7-4 Changing the ppm Value 8 INITIAL SETTING 8-1 Overview 8-2 Entering the Mode for Initial Setting 1 8-3 Entering the Mode for Initial Setting 2 8-4 Entering the Mode for Initial Setting 4 8-5 Entering the Mode for Initial Setting 5 8-6 Example of Changing an Initial Setting Content (Selection of Atmospheric Correction) 8-7 Initial Setting 1 8-8 Initial Setting 2 Page Page 8-9 Initial Setting 4 8-10 Initial Setting 5 9 ACCESSING THE FUNCTIONS 9-1 Accessing by Help key 9-2 Accessing by 007 Page 65 10 CHECKS AND ADJUSTMENTS [Cautions on CHECKS AND ADJUSTMENTS] 10-1 Electronic vial Adjustments Procedure to adjust the electronic vial: 66 10-2 Circular Vial 10-3 Vertical Reticle 10-4 Perpendicularity of Line of sight to horizontal axis 10-5 Vertical 0 point error 10-6 Laser Plummet 10-7 Optical Plummet 10-8 Offset Constant 10-9 Beam axis and Line of sight 10-10 The EDM beam axis Page 11 SPECIFICATIONS 11 SPECIFICATIONS Reflectorless items are applicable to Nmodels only. Telescope Distance measurement Measurement range (Good condition) Page 12 DATA COLLECTOR 13 APPENDIX 13 APPENDIX 13-1 Error Messages 13-2 Atmospheric Correction 81 13-3 hPa and mmHg Conversion Table Converting from hPa to mmHg Converting from mmHg to hPa 13-4 82 Error when no Atmospheric Correction is made Error table:When hPa (15C, 1013hPa as standard) Error table:With mmHg (15C, 760mmHg as standard) 13-5 Atmospheric Refraction and Earth Curvature Correction 13-6 Distance Range 14 NOTICE TO THE USER OF THIS PRODUCT 14 NOTICE TO THE USER OF THIS PRODUCT PENTAX R-300 (p65-88) 10/30/02 11:11 AM Page 86