Manuals / Brands / Lawn and Garden / Telescope / Pentax / Lawn and Garden / Telescope

Pentax R-315(N), R-325(N), R-326 Adjustments , Procedure to adjust the electronic vial:, 66

1 91

Download 91 pages, 964.1 Kb

●Please check the electronic vial in a steady environment that has no vibration

or rapid temperature change.

●When the electronic vial is checked outdoors and on a tripod, avoid sunlight

influence by using a sunshade. Please wait for a while until the instrument and

tripod are at the same temperature as the surrounding air.

●When the instrument is seen at the position of “Left circle”, movement and the

inclination of the instrument become the same on the screen in the electronic

vial. Please note that the movement of the bubble becomes opposite direction

if it is seen at the position of “Right circle”.

Adjustments

It is necessary to adjust as following when the bubble is not in the vicinity of the

center in the confirmation of r.

Procedure to adjust the electronic vial:

Press the [POWER] and [LASER] key

simultaneously.

Following screen is viewed.

Aim at a target and press [F3] key.

Following screen is viewed.

Turn the instrument 180˚ and reverse the

telescope.

Aim at the same target accurately, then press

[F3].

Following screen is viewed.

Pressing the [ENT] key completes the

adjustment.

SELECTSELECTF3SELECTSELECT

Electronic vial adj.

Avoid direct sunlight and viration

during adjustment Aim at a target

accurately, then press [F3]

0 SET

SELECTSELECTF3SELECTSELECT

Electronic vial adj.

Turn the instrument 180˚ and

reverse the telescope.

Aim at the same target accurately,

then press [F3]

0 SET

F5SELECTF3SELECTSELECT

Electronic vial adj.

Successfully accomplished.

Press [ENT].

66

10 CHECKS AND ADJUSTMENTS

PENTAX R-300 (p65-88) 10/30/02 11:11 AM Page 66

Contents

Main Safety Precautions (Must be followed) CAUTION Page Ni-MH CAUTION 3 Usage Precautions [Solar Observation] [Laser Beam] [EDM axis] 4 [Battery & Charger] [Auto focus] [LD POINT, Laser pointer] 5 [Storage and Operating Environment] [Transporting and Carrying the Instrument] [Checks and Repairs] Page Page Page 1 BEFORE USING THE INSTRUMENT 1-1 Names of Parts 1 BEFORE USING THE INSTRUMENT R-325(N)/R-322(N)/R-323(N): Detachable type Page 1-2 Unpacking and Packing Unpacking the Instrument from the case Packing the Instrument in the case 1-3 Standard equipment 11 1-4 Attaching and Charging the Battery Page 14 [Detaching the battery] [Display panel] Page 2 DISPLAY AND KEYBOARD 2-1 Display and Keyboard 2-2 Operation Key Key Description 2 DISPLAY AND KEYBOARD 2-3 Function Key Display F.Key Description Mode A Mode B Other functions 18 2 DISPLAY AND KEYBOARD [How to move the menu number] Example: The cursor is located at Menu 1. Press the numeric key 0 and 2 to move to Menu 2 or press [F4] [h]. 2-4 Alphanumeric Input 2-5 LD POINT, Laser Pointer 20 3 PREPARATION FOR SURVEYING 3-1 Centering and Leveling of the Instrument Setting up the instrument and the tripod 3-2 Laser plummet Laser plummet model 21 [For the Shift type laser plummet equipment model] [Brightness adjustment of laser] 22 3-3 Optical plummet (Option) [Detachable type] [Shift type] 23 3-4 Leveling with Circular vial 3-5 Leveling with Electronic vial [Electronic vial screen] [Leveling] 24 25 3-6 Eyepiece Adjustment Eyepiece adjustment 3-7 Target Sighting Page [Auto focus :Target sighting by Normal mode] 28 [Auto focus :Target sighting by Continuous mode] 29 [Auto focus :Target sighting by Power focus mode] 30 [Target sighting by Manual focus] 31 3-8 Attachment and Detachment of Tribrach Detachment Attachment 32 33 4 TURNING THE POWER ON 4-1 Turning the Power On and Off H. angle 40"39'85 H. dst. 0000000 V 4-2 Adjusting LCD Contrast 34 H. angle 40"39'85 H. dst. 0000000 V 4-3 Adjusting Illumination Brightness 4-4 Adjusting Reticle Illumination 40"39'85 35 H 5 ANGLE MEASUREMENT 5-1 Measuring an Angle 5-2 Resetting the Horizontal Angle to 0 5-3 Holding the Horizontal Angle 37 H. angle 00"00'0 H. angle 20"45'130 5-4 Inputting an Arbitrary Horizontal Angle In case of Horizontal angle 12345' 20" input Press [F5] [MODE] to enter mode B. 5 ANGLE MEASUREMENT 39 H. angle 20"45'123 5-5 Displaying the % Slope of the Vertical Angle 40 5-6 Changing the Horizontal Angle from Clockwise to Counterclockwise 41 H. angle 40"29'-267 6 DISTANCE MEASUREMENT 6-1 Target Setting V 42 Page 44 6-2 Distance Measurement V 45 V 7 CORRECTION MODE 7-1 Changing the Target Constant Page 7-2 Changing the Temperature Page 7-3 Changing the Atmospheric Pressure Page 7-4 Changing the ppm Value 8 INITIAL SETTING 8-1 Overview 8-2 Entering the Mode for Initial Setting 1 8-3 Entering the Mode for Initial Setting 2 8-4 Entering the Mode for Initial Setting 4 8-5 Entering the Mode for Initial Setting 5 8-6 Example of Changing an Initial Setting Content (Selection of Atmospheric Correction) 8-7 Initial Setting 1 8-8 Initial Setting 2 Page Page 8-9 Initial Setting 4 8-10 Initial Setting 5 9 ACCESSING THE FUNCTIONS 9-1 Accessing by Help key 9-2 Accessing by 007 Page 65 10 CHECKS AND ADJUSTMENTS [Cautions on CHECKS AND ADJUSTMENTS] 10-1 Electronic vial Adjustments Procedure to adjust the electronic vial: 66 10-2 Circular Vial 10-3 Vertical Reticle 10-4 Perpendicularity of Line of sight to horizontal axis 10-5 Vertical 0 point error 10-6 Laser Plummet 10-7 Optical Plummet 10-8 Offset Constant 10-9 Beam axis and Line of sight 10-10 The EDM beam axis Page 11 SPECIFICATIONS 11 SPECIFICATIONS Reflectorless items are applicable to Nmodels only. Telescope Distance measurement Measurement range (Good condition) Page 12 DATA COLLECTOR 13 APPENDIX 13 APPENDIX 13-1 Error Messages 13-2 Atmospheric Correction 81 13-3 hPa and mmHg Conversion Table Converting from hPa to mmHg Converting from mmHg to hPa 13-4 82 Error when no Atmospheric Correction is made Error table:When hPa (15C, 1013hPa as standard) Error table:With mmHg (15C, 760mmHg as standard) 13-5 Atmospheric Refraction and Earth Curvature Correction 13-6 Distance Range 14 NOTICE TO THE USER OF THIS PRODUCT 14 NOTICE TO THE USER OF THIS PRODUCT PENTAX R-300 (p65-88) 10/30/02 11:11 AM Page 86