30
Collimator Target
Power focus
key
Collimator
Target sighting
• Tilting the Power focus key “clockwise”makes it possible to focus on closer objects and
“counterclockwise”will focus on farther objects.
• Tilting angle of the Power focus key makes it possible to perform following three
focusing speeds.
Low speed: When tilted to middle position by approx.5 degrees
Middle speed: When tilted fully by approx.10 degrees
High speed : When tilted fully by approx.10 degrees and passed one second
• Operating the Power focus key rotates the AF ring,so do not touch it while it is rotating.
[Target sighting by Manual focus]
Loosen the telescope clamp and horizontal clamp screws.
Point the telescope at the target using a collimator.
Tighten the above two screws.
Adjust the eyepiece.
Look through the telescope and then rotate the AF ring and stop it where the target
can be seen clearly and the target image does not move in relation to reticle even if
your eye is vertically and horizontally moved.
Aligh the reticle accurately on the target using telescope and horizontal tangent screws.
• The AF ring rotation “clockwise”makes it possible to focus on closer objects and
“counterclockwise”will focus on further objects.
6
5
4
3
2
1
Collimator
AF Ring
Target
Collimator
Target sighting