56
5. Selection of Control signal:[SIGNAL CONTROL]
Select whether the control signal is effective or not.
6. Selection of XON/XOFF:[XON/XOFF]
Select whether to enable or disable XON/XOFF.
7. Selection of Through command:[THROUGH COMMAND]
Select whether to disable data output without receiving
any data request command or enable the “a”to “f”
command data output.
8.12 Initial setting of date and time1. Input of date
Set date using [numeric keys].
Year / month / date (05/12/24)
2. Input of time
Set time using [numeric keys].
Time :minute : second (21:55:48)
3. Selection of week day
Select week day.
• The date Clock is powered by the built-in lithium battery.The lithium battery needs to
be replaced in five years. When the message ”Li-batt.voltage is low.” is shown on the
display screen,have the lithium battery replaced by the dealer from whom the
instrument was purchased.The timing of battery replacement varies depending on
the frequency of use and the environment of where the instrument is stored while
not in use.
1. ON
2. OFF
1. ON
2. OFF
1. NIL
2. a
3. b
4. c
5. d
6. e
7. f
1. SUN
2. MON
3. TUE
4. WED
5. THU
6. FRI
7. SAT