Perle Systems 5500208-43 manual Set UDP, Outboundport, Startipaddress, Endipaddress

Line Service Commands

Set UDP

Description	Configures the UDP settings for the serial line.
User Level	Normal, Admin
Syntax	set udp line .<number>* entry 1234
	both auto-learnspecific <UDP_port> [<start_IP_address>]
	[<end_IP_address>]
	set udp line .<number>* entry 1234 in
	any-portauto-learnspecific <UDP_port> [<start_IP_address>]
	[<end_IP_address>]
	set udp line .<number>* entry 1234 out <UDP_port>
	[<start_IP_address>] [<end_IP_address>]
	set udp line .<number>* entry 1234 none
Options	entry 1234
	Selects which of the 4 available entries we wish to define/modify. For each entry the
	user can specify a different IP address range, UDP port and direction of data flow.
	bothinoutnone

The direction in which information is received or relayed:

zNone—UDP service not enabled.

zIn—LAN to serial.

zOut—Serial to LAN.

zBoth—Messages are relayed both directions.

auto-learn

The IOLAN will only listen to the first port that it receives a UDP packet from.

Applicable when set to In or Both.

any-port

The IOLAN will receive messages from any port sending UDP packets. Applicable when set to In.

specific

The port that the IOLAN will use to relay messages to servers/hosts or the port from which the IOLANN will receive messages to be forwarded to the serial port. This option works with any setting except None. The IOLAN will listen for UDP packets on the port configured by the DS Port parameter.

<outbound_port>

The port that the IOLAN will use to relay messages to servers/hosts. The IOLAN will listen for UDP packets on the port configured by the DS Port parameter.

<start_ip_address>

The first host IP address in the range of IP addresses (for IPV4 or IPV6) that the

IOLAN will listen for messages from and/or send messages to.

<end_ip_address>

The last host IP address in the range of IP addresses (for IPV4, not required for IPV6) that the IOLAN will listen for messages from and/or send messages to.

48