Manuals / Perle Systems / Computer Equipment / Switch

Perle Systems DS1, TS2 manual 147

Models: DS1 TS2

1 246
Download 246 pages 24.21 Kb
Page 147
Image 147

Channels

Auto Clear Mode

When enabled, automatically clears the alarm when the trigger condition

 

changes; for example, if the Trigger is Inactive and the alarm is triggered, once

 

the input becomes active again, the alarm will automatically be cleared

 

Default: Enabled

Manual Clear

When enabled, a triggered alarm must be manually cleared.

Mode

Default: Disabled

Syslog

When enabled, sends a message to syslog when an alarm is triggered or

 

cleared. The syslog entry includes the severity level and the value that caused

 

the alarm to trigger or clear. The syslog message is associated with Level

 

Critical.

 

Default: Disabled

SNMP

When enabled, sends an SNMP trap when an alarm is triggered or cleared. The

 

trap consists of the severity level and whether the alarm was triggered or

 

cleared.

 

Default: Disabled

Digital Output

Overview

When the channel is set for digital output, either voltage is applied to the channel or the channel is grounded. Note that the internal jumpers must match the software setting and must be set to Output (by default, they are set to Input); see Digital I/O Module to find out how to set the internal jumpers.

Functionality

The Digital output channels support three types of Digital output: sink (voltage), source (ground), and sink and source (apply voltage or ground). For the output type, you can configure the following options:

zYou can choose to manually activate/deactivate the Digital output.

zYou can choose to manually activate/deactivate the Digital output and then specify that the Digital output will either pulse (you get to specify the active and inactive pulse times) continuously or for a specified number of pulse counts.

zYou can choose to manually activate/deactivate the Digital output and then specify a delay before the output goes from inactive to active or active to inactive.

zYou can also specify a failsafe action that can either activate or inactivate the Digital output when the failsafe timer is triggered (see Failsafe Timer Functionality for more information).

In an industrial freezer warehouse, the IOLAN D4 is used to monitor the freezer doors. When one of the industrial freezer doors are left open for more than five minutes, the Monitoring Application (using the Perle API) starts the Digital output sink, causing the strobe light on top of the offending freezer to activate.

147

Page 146 Page 148
Page 147
Image 147
Perle Systems DS1, TS2 manual 147
Page 146 Page 148

DS1, TS2 specifications

Perle Systems TS2 and DS1 are advanced serial-to-Ethernet devices designed to facilitate seamless integration of serial devices with modern IP networks. These devices serve as crucial tools for businesses looking to enhance their communication capabilities while leveraging existing infrastructure.

One of the standout features of the Perle TS2 and DS1 is their ability to support multiple serial protocols including RS232, RS422, and RS485. This versatile support allows businesses to connect various legacy devices to their networks, ensuring that critical equipment can still communicate effectively in an increasingly digital landscape.

The TS2 model is particularly noted for its dual serial ports, enabling simultaneous communication with multiple devices. This capability is invaluable for applications requiring real-time data transmission, such as remote monitoring and automated control systems. The DS1 model, on the other hand, is designed for single-port use, making it an ideal solution for smaller-scale operations or specific single-device connections.

Both the TS2 and DS1 incorporate advanced features such as configuration through a web interface, which simplifies setup and management. Users can easily access device settings and monitor performance metrics remotely, enhancing operational efficiency. These devices also support various network protocols such as TCP/IP, UDP, and ICMP, ensuring compatibility with a wide range of network architectures.

In terms of security, Perle Systems prioritize user data protection. The TS2 and DS1 offer features including SSL encryption and SSH protection, providing an added layer of security for sensitive information transmitted over the network. This is particularly important for industries where data integrity and security are paramount, such as healthcare and finance.

Additionally, the rugged design of both devices ensures reliable performance even in harsh environments. With extended temperature ratings and robust housing, the TS2 and DS1 can operate in diverse conditions without compromising functionality.

To summarize, the Perle Systems TS2 and DS1 provide a reliable and flexible solution for connecting legacy serial devices to modern networks. With their support for multiple serial protocols, web-based management, robust security features, and rugged design, these devices cater to a variety of industries looking to modernize their communication infrastructure while maintaining existing equipment. Whether for large-scale operations or smaller implementations, the TS2 and DS1 equip businesses with the tools needed for effective serial communication in an IP-driven world.