Perle Systems TS2 Digital I/O Extension, Front Door, Warehouse Perle Iolan Reception, Remote Host

Channels

Active Signal	How long the channel will be active during the pulse mode.
Width	Range: 1-9999 x 100 ms
	Default: 1 (100 ms)
Delay	When a deactivate command is issued, a delay is implemented before the
	command is executed.
	Range: 1-9999 x 100 ms
	Default: 1 (100 ms)
Failsafe Action	When there has been no I/O activity within the specified time (set in the I/O
	Interfaces, Settings on the Failsafe Timer tab) and the Failsafe Timer is
	triggered.
	Data Options:
	z None—The state of the Digital/Relay output remains the same, no change.
	z Activate Output—Activates the channel.
	z Deactivate Output—Deactivates the channel.
	Default: None

Digital I/O Extension

Overview

The Digital I/O extension feature connects a digital input signal to digital output(s)/relay(s) and/or a TCP/IP application over an IP network. Therefore, when the state of the digital input changes, you can also change the state of the digital output or relay channel or output serial signal pin on a local I/O channel(s), other IOLAN I/O channels, other IOLAN serial signal pins, or the data can be sent to an application(s).

For example, when the door opens (I/O digital input sensor) in a factory, a light goes on in the reception office (remote IOLAN relay channel), and the door open/close is logged by an application on a remote host.

Front Door

perle

IOLAN

Warehouse

perle IOLAN Reception

Network

Remote Host

152