Adjustment
13.05.10 Top feed lifting motion
Requirement
When lifting presser 1 is resting on the needle plate, vibrating presser 4 and needle point 5 must reach the needle plate at the same time at the highest top feed stroke.
23
5
1 
4
Fig. 11 - 10
● Lower lifting presser 1 onto the needle plate.
● Loosen screws 2 just enough to allow eccentric 3 to be turned against a resistance on it
shaft.
●Turn eccentric 3 according to Requirement.
●Tighten screws 2.
13 - 12