Adjustment

13.05.16 Bobbin winder

Requirement

1.With the bobbin winder engaged, drive wheel 1 must be driven reliably.

2.With the bobbin winder disengaged, friction wheel 5 must not run against drive wheel 1.

3.The bobbind winder must switch itself off when the filled thread is about 1 mm from the rim of the bobbin.

1

25

4

3

1 mm

Fig. 11 - 16

●Re-position drive wheel 1 (screws 2) according to Requirements 1 and 2.

●Re-position pin 3 (screw 4) according to Requirement 3.

13 - 18