Adjustment

13.06.04 Control lever stroke

Requirement

1.When engaging lever 5 is operated the pin of control lever 6 must drop freely into the track of control cam 7.

2.After thread trimming, control lever 6 must pass freely on the right side of stop plate 3 and engage control lever 5 behind stop plate 3.

3.There must be a clearance of 0.2 mm between the pin of control cam 6 and the right- hand inside of the control cam track.

0.2mm

4

5

2

3

6

1

7

Fig. 11 - 21

● Re-position stop plate 1 (screws 2) and stop plate 3 (screws 4) according to

Requirement.

13 - 23