Cloth Presser
The cloth presser is to prevent cloth/fabric/ materials from lifting during the felting process.
1.Place the cloth/fabric/materials on the needle plate and under the cloth presser.
2.Loosen the cloth presser height adjusting screw to adjust the height of the cloth presser.
3.Move the clear fabric cover with needle guard up or down until the red indicator on the presser bar aligns with the correct height for the thickness of your fabric and felting material.
L= low position for thin or medium fabrics.
M= medium position for medium weight fabrics.
H= high position for heavy or thick fabrics.
4.Tighten the clear fabric cover height adjusting screw.
Note: The fabric and felting material must move freely under the clear fabric cover with needle guard without any restrictions.
English
5
