Philips 150MT manual Setting Activate to on or OFF

Using other menus (NTSC_2)

You can select a specific channel to appear on the television when the timer turns the set ON. Follow these steps to select the channel.

1. Press the MENU button on the remote control to show the on-screen menu.

2. Press twice to highlight FEATURES.

3. Press and the menu will shift to the left. TIMER will be highlighted.

4. Press again to shift the menu to the

left. Then press repeatedly until the CHANNEL control is highlighted.

5. Press the NUMBERED buttons to enter the desired start-up channel or

press repeatedly to enter the startup channel you want.

6. Press the MENU button repeatedly to clear the menu from the screen.

RETURN TO TOP OF THE PAGE

Setting Activate to ON or OFF

After you have set the Time, Start Time, Stop Time, and Start Channel, the timer must be set to come on ONCE or DAILY, or turned OFF using the ACTIVATE control.

1.Press the MENU button on the remote control to show the on-screen menu.

2.Press twice to highlight FEATURES.

3.Press and the menu will shift to the left. TIMER will be highlighted.

4.Press again to shift the menu to the

file:///D/TV/english/150mt/osd/n_f.htm (4 of 17) [12/24/2002 11:44:29 AM]