Philips 150MT manual Setting up the Access Code, Features

Using other menus (NTSC_2)

graphic violence (V), explicit sexual situations (S), or crude, indecent language

(L).

RETURN TO TOP OF THE PAGE

Setting up the Access Code

AutoLockTM allows parents to block out or 'censor' any channels they think children should not watch. A channel blocked by the AutoLockTM control cannot be viewed until a correct access code is used to unlock the channel for viewing. First, let's set your AutoLock access code.

1.Press the MENU button on the remote control to show the on-screen menu.

2.Press twice to highlight

FEATURES.

3.Press and the menu will shift to

the left. Then press once to highlight the AutoLock control.

4.Use to highlight ACCESS CODE.

5.Press 0, 7, 1, 1 on the remote control. INCORRECT will appear on the screen.

6.Press 0, 7, 1, 1 on the remote control again. ENTER NEW CODE will appear on the screen.

7.Enter a new four-digit code using the number buttons. CONFIRM CODE will appear on the screen.

8.Enter your new four-digit code again. CORRECT will flash on the screen briefly and the highlight bar goes back to AutoLock.

9.Press the MENU button repeatedly to clear the menu from the screen.

file:///D/TV/english/150mt/osd/n_f.htm (9 of 17) [12/24/2002 11:44:30 AM]