Philips 150MT manual Monitor TV to VCR, Basic Connection

Basic Monitor/TV Connections

1.If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV.

If your antenna has flat, twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 -to 75- ohm adapter.

2.Push the round end of the adapter (or antenna) onto the 75 (ohm) plug on the back of the TV.

If the round end of the antenna wire is threaded, screw it down finger tight.

Note: If your home has separate UHF and VHF antennas, you will need an optional combiner to connect to the TV.

RETURN TO TOP OF THE PAGE

Monitor TV to VCR

BASIC CONNECTION

Follow the steps on the right to connect a basic antenna or Cable TV signal to a VCR, and then the VCR to the TV. For information on other hookups (possible when cable/ descrambler boxes are included), refer to the owner's manuals for the VCR and the cable converter.

file:///D/TV/english/150mt/install/basic.htm (2 of 3) [12/24/2002 11:43:54 AM]