Important for the United Kingdom

Thisapparatus is fitted with an approved moulded 13 Amp
plug.To change a fuse in this type of plug proceed as follows:
aRemovefuse cover and fuse.
bFixnew fuse which should be a BS1362 5A, A.S.T.A. or
BSIapproved type.
cRefitthe fuse cover.
Ifthe fitted plug is not suitable for your socketoutlets, it should
becut off and an appropriate plug fitted in its place.
Ifthe mains plug contains a fuse, this should have a valueof
5A.If a plug without a fuse is used, the fuse at the distribution
boardshould not be greater than 5A.
DNote:* The severed plug must be destroyed to avoid a
possibleshock hazard should it be inserted into a 13A
socketelsewhere.
Howto connect a plug:
Thewires in the mains lead are coloured in accordance with
thefollowing code:
BLUE- ’NEUTRAL’ (’N’)
BROWN- ’LIVE’ (’L’)
dTheBLUE wire must be connected to the terminal which
ismarked with the letter ’N’ or coloured BLACK.
eTheBROWN wire must be connected to the terminal
whichis marked with the letter ’L’ or coloured RED.
fDonot connect either wires to the earth terminal in the
plugwhich is marked with the letter ’E’ or by the safety
earthsymbol \or coloured green or green-and-yellow.
Beforereplacing the plug cover, make certain that the cord
gripis clamped over the sheath of the lead - not simply over
thetwo wires.

Before you start ...

EWhenyou install your TV-VIDEO Combi for the first time,
pleaseread the following paragraphs:
a’Connectingthe cables.’
b’Initialinstallation’.
c’Importantnotes for operation’.
EIfyou want to connect additional equipment, please read
paragraph:’Connecting additional equipment’, or the
paragraph:’Connecting a HiFi-set’ in the chapter ’ADDI-
TIONALFUNCTIONS’.
EThemost important button-functions are displayedin
paragraph’User quide (OSD)’.
EIfyou want to set your language , please read paragraph:
’Settingyour language’.
EIfyou want to set time and date , please read paragraph:
’Settingclock and date’.
EIfyou want to search and store TV channels automati-
cally, please read paragraph: ’Automatic TV channel
search’.
EIfyou want to sort TV channels manually, please read
paragraph:’Channel Number Allocation’.
EIfyou want to search for TV channels that have not been
storedyet, please read paragraph: ’New TV Channel
Search’.
EIfyou want to delete a TV channel, please read
paragraph:’Deleting a TV channel’.

Important notes for operation

EWeadvise you, from now on, to switch the set to standby
usingthe STANDBYmbutton on the front of the set or on
theremote control.
Whenthe set is in the standby mode, a small red lamp on
theleft of the front of the set will be alight.
EYoucan switch on with the Ppbutton, the 0-9 but-
tonsor by inserting a cassette.
AAttention:When you use the power switch 8on the
sidepanel, you switch off the set completely from the
mainspower supply. No programmed recordings will
thenbe made. The red lamp on the left of the front of the
setwill not be alight. After approximately 4 days, the date
andclock settings will be lost.
EAttention:Before you switch off the appliance with the
powerswitch 8, remove the tape by pressing the
Jbutton.
1. FIRST STEPS
2