Philips 220X manual Conference Controls, Kindermann Pixie Pro System Control

CONFERENCE CONTROLS

KINDERMANN PIXIE Pro

Conference controls for:

￿Projectors, displays, etc.

￿Electronic devices, e.g. DVD player

￿Volume control, e.g. amplifier

￿Room technology, e.g. screens, ceiling lifts, shades

PIXIE Pro conference controls

The PIXIE Pro control systems are intelligent gadgets for conference, lecture rooms and classrooms where data/video projectors, displays, volume controls or room technology are permanently installed and often used by different persons.

Operating all the devices with their various functions is really easy. The user can control everything from a centre point by pressing the buttons of a single unit and doesn’t need several remote controls. Thus operation errors can be avoided.

The PIXIE Pro System Control and PIXIE Pro NRC can be freely configurated to control a data/video projector, a display, a DVD player, Audio systems, screens, ceiling lifts, room lights and shades.

The control functions either via RS 232, relais or infrared commands.

The PIXIE Pro conference controls are modular systems and can be adapted to the individual requirements, resp. expanded.

Stainless steel front cover No. 5699-10

Optional cover of elegant design. For covering the PIXIE Pro electronic part, i.e. the unit without

PIXIE Pro System Control PIXIE Pro Network Room Control PIXIE Pro NRC Controls Pucks

KINDERMANN PIXIE Pro System Control

Power on/off											Select source
e.g. as general control											1–8 sources
of all connected devices											(blind cover optional)
			￿		￿		￿	￿
Volume control					￿		￿		￿		Navigation in the
projector or amplifier											on-screen menu
(blind cover possible)					￿		￿				DVD player, projector
				￿	￿		￿		￿		(blind cover optional)
Light sensor controls		￿			￿	￿				￿	Password protection
background illumination											optional blocking of
depending on the room											unauthorized use
light
Screen, lift, up/down											AUX functions up/down
(blind cover optional)
											(blind cover optional)
	Special functions						Operating buttons for disc
	e.g. mute, freeze, format,						drive for playing DVD, VCR
	PIP etc.						(blind cover possible)

plastic casing, when installed in a desk or a wall.

Pixie Pro System Control as stand alone unit

The PIXIE Pro can learn the commands of the original remote controls of the various sources and safely transmit the IR signals via the installed wiring to the units.

It can also control electrical screens or ceiling lifts via the IR remote.

Even more complex tasks can be carried out after programming the unit correspondingly.

The operating panel can be individually adapted and labelled to the user’s require- ments.

The KINDERMANN PIXIE Pro System Control can be used as a desktop unit or for wall installation. It can also be inserted in a cable channel.

Cable IR transmitter No. 5698-10

Additional IR transmitter

Extension cord No. 5698-11

For transmitting the IR signal and for the power supply

KINDERMANN PIXIE Pro System Control		No. 5699
Dim. Board:	181 mm x 107 mm x 30 mm
Desktop casing:	210 mm x 115 mm x 35 mm
Power supply:	Stabilized unit
	100–240 VAC / 6 VDC, 0.8 A
Output:	IR transmitter module
	(1 module supplied)
Recommended connection cable	3-pin, 0.25 – 0.5 mm2, protected
between IR transmitter/PIXIE Pro	(No. 5698-11) optional
Possible installations:	Desk mounting, wall mounting or mounting in cable
	channel. Supplied with desktop casing

26 Subject to technical alterations, as well as to changes of the design and the colour