23
English
EN
Reorder channels
After you install channels, you can rearrange the
order in which they appear.
1 When watching TV, press OK to dis play
the channel grid .
2 Press b(OPTIONS).
The channel options menu appears. »
3 Press to select [Reorder] and then
OK to return to the channel gr id.
4 Press to select the channel you
want to reorder and pre ss OK.
The selected channel is highlighted. »
5 Press to move the highlighted
channel to your preferre d position and
press OK.
6 Press b(OPTIONS).
»[Done reordering] appears on the
screen.
7 Press OK to nish reorder ing.
Test digital reception
If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Digital: test recept].
3 Press OK or to enter the menu.
4 Press to enter the frequenc y of
the channel you want to test .
5 Press OK to conrm the frequ ency and
then press OK again to conrm [Se arch].
6 When complete, selec t [Store] to stor e
the frequency.
Note
If the signal qualit y and strength i s poor, •
reposition the ante nna or satellite dis h and
retest.
If you still have problem s with the recepti on •
of your digital broadc ast, contact a s pecialised
installer.
Step 3 Fine-tune analogue channels
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel install.] >
[Analogue: Manual].
The »[Analogue: Manual] menu appears.
3 Press to select [Fine-tune] and then
OK or to enter [Fine-tune].
4 Press to adjust frequency.
5 Press OK when done.
6 Press to select [Store current
channel] to store the ne-tune d channel
under the current cha nnel number.
7 Press OK or to enter [Store curr.
chan.] and press OK.
8 Press to return to the [Channel install .]
menu.
Rename channels
Channels can be renamed so that a name of
your choice appears whenever the channel is
selected.
1 When watching TV, press OK to dis play
the channel grid .
2 Press to select the channel you
want to rename.
3 Press b(OPTIONS).
The channel options menu appears. »
4 Press to select [Rename channe l].
A text input box appears. »
5 Press to select and change
characters.
6 Select [Done] to nish renaming
channels.
Tip
Use •[Aa] to change upper- case letter to
lower-case lett er and vice versa .
Downloaded From TV-Manual.com Manuals