1 Switch on the TV and select a TV channel.

2 Press ‘319753’ followed by (Mute) within 10 seconds.

»The setup menu is displayed.

Navigate the setup menu

To navigate the setup menu,

Press on the remote control to select a menu.

Press to configure or modify the settings of the selected function.

Press M on the PBS setup remote control or MENU on the guest remote control to return to the previous menu.

Select a language

You can choose a language for the on-screen

display on your TV.

1

Enter the setup menu.

2

Press to select a language.

» The setup menu is displayed in the selected language.

Note

You can choose [ENGLISH], [FRANCAIS], [DEUTSCH], or [ITALIANO] as your preferred language.

Select the country

Select the country where you are installing the TV.

1 Enter the setup menu.

2 Press to select the country.

Set the type of communication

You must set the correct communication

protocol to work with an external system.

1

Enter the setup menu.

2

Press to select [COMMUNICATION].

COMMUNICATION

 

COMMUNICATION

SP-SPI

STORE

>

ENABLE CARD SLOT

YES

DCM TYPE

GENERIC

CP

YES

3 Press to select the type of communication:

[COMMUNICATION]: Select one of the following:

[SP-SPI], [SP-I2C], [HM-LINK] or [SERIAL XPRESS]: Sets the communication protocol between the TV and an external device connected to the TV, such as a set- top box.

[SMART RC]: Accesses PayTV channels using remote control.

[OFF]: Allows no communication.

[STORE]: Stores the settings. Select this option after making all the selections.

[ENABLE CARD SLOT]: Select [YES] to enable the smart card slot.

[DCM TYPE]: Select [GENERIC] if you use [SP-SPI] or [SP-I2C] protocol. Select [NO SOURCE SWITCH] if the set-top box requires no switching.

[CP]: Select [YES] to control the panel in system mode.

12EN

Page 12
Image 12
Philips 26HFL5870D/10 user manual Navigate the setup menu, Select a language, Select the country