the digital ouput of the DVD player is set to PCM mode.
•Check that the [MIN VOLUME] is not set to zero (see ‘Configure the sound settings’ on page 18).
Communication issues
The TV does not communicate with the external device:
•Select the correct communication source.
•Check that the card slot is enabled, if you want to use the system/smart card.
Guest RC does not work
The guest remote control does not work:
•Change the batteries if they are weak or old.
•Check the orientation of the batteries and make sure that they are inserted in accordance with the +/- orientation.
•If the remote control is locked, unlock the remote control (see ‘Enable or disable the remote control’ on page 19).
Other issues
The character ‘F’ appears on screen:
•This means that the TV is in factory mode. Press MENU at the side of the TV for a few seconds to reset the TV to normal mode.
Contact us
If you cannot resolve your problem, refer to the FAQs for this product at www.philips. com/support.
If the problem remains unresolved, contact Philips Consumer Care in your country as listed in the Addendum.
Warning
•Do not attempt to repair the product yourself. This may cause severe injury, irreparable damage to your product or void your warranty.
Note
•Make a note of your TV model and serial number before you contact Philips. These numbers are printed on the back of the TV and on the packaging.
This text appears in the PL_PL (Polish) language only.
Insert at the end of the troubleshooting section.
Uwaga
•W odbiorniku wysokie napięcie! Przed zdjęciem obudowy wyjqć wtyczkę z gniazda sieciowego!
E n g l i s h
EN 33
