Philips 26HFL5870D/10 instruction

3 Press to set the source and type of the software download:

•[SOURCE]: Select [USB] or [RF] as the source of download.

•[SW TYPE]: Select one of the following types of software for download:

•[SSB NVM]: Downloads SSB NVM software.

•[SSB FIRMWARE]: Downloads digital software such as MPEG 2 and MPEG 4.

•[8051 FIRMWARE]: Downloads the TV startup data.

•[IBOARD NVM]: Downloads the TV settings.

•[IBOARD FIRMWARE]: Downloads iboard software.

•[ALL]: Downloads all the software upgrades.

•[PROGRAM NO.]: Selects the RF channel to download the software from. This is available only when you select RF as the source of download. Press 0-9 (Numeric buttons) to select the channel.

•[RF TO TV]: Downloads the software from an RF channel to the TV. This is available only when you select RF as the source of download.

•[USB TO TV]: Downloads the software from a USB storage device to the TV. This is available only when you select USB as the source of download. Executes also via the F button on the setup remote control.

Note

•Do not remove the USB storage device during cloning.

•All standard remote control functions and TV controls are disabled during cloning.

26EN

Image 26

Philips 26HFL5870D/10 user manual

Contents

Register your product and get support at Page Contents Koninklijke Philips Electronics N.V. All rights reserved To use according to scientific evidence available today Fatto in Székesfehérvár, il 02 Febbraio Hungary Safety Risk of electric shock or fire Screen care Disposal of your old product and batteriesPage Guest menu TV overviewSide controls » The guest menu is displayed Access the guest menu with guest remote control Access the setup menu with PBS setup remote control Access the setup menu with guest remote control Select the country Navigate the setup menuSelect a language Set the clock Press to configure one of the followingSet the number of channels Set the number of channels for different kindsPage Configure the switch-on settings Switch on / OSD Preset the picture format Preset the switch-on channelPreset the switch-on volume Preset the switch-on power mode Display the channel banner Enable or disable the volume indicatorSet the channel display Select the preferred audio and subtitle language Configure the security settings Configure the picture settingsConfigure the sound settings Commercials are aired or when you switch channels Select the security level Enable or disable the TV controlsEnable or disable the remote control Security Keyboard Lock Enter the setup menu Press to select Configuration Control Configure the control optionsAutomatic detection of Scart signal Or select no to enable the tuning of double digit channels Energy Saving Select the energy saving optionInsert RGB Automatically install the channels Network Frequency Select the type of input Select the systemSelect a program Customize the TV channels Label a channel Select a ringChannels Mute a channel Clone data USB connector of your TVUpgrade Cloning Press To select CloningPage To a remote control of one of those colors Healthcare VGA Back connectorsConnect devices Side connectors Use a Kensington lock Use a Conditional Access ModuleAccess CAM services Insert and activate a CAM Product information Supported display resolutionsPower Multimedia No access to PBS setup menu TroubleshootingTV power on/ off issues Picture issues Guest RC does not work Communication issuesOther issues Contact us CAM IndexAudio/video out Auto Scart ESP G l i s h