Mode selector
Press the 
(SELECT) button to select the required mode : DVD or AUX. The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if left idle.The remote control automatically returns to TV mode.
The following keys are opertaional depending on the equipment :
standby | navigation and adjustments |
| |
fast rewind |
|
fast forward | digit keys |
recording |
|
pause | programme selection |
stop |
|
play | audio selection |
|
tv menu
OSD menu
cancel
Installing your television set
& Positioning the television set
Place your TV on a solid stable surface.To avoid danger, do not expose the TV to water or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear of the set. Leave at least 5 cm around each side of TV set to allow for proper ventilation.
éConnecting the aerials
•Use the aerial connection lead supplied and
connect the ¬ socket situated at the bottom of the TV to your aerial socket.
• Connect the power lead to the television and the mains plug into the wall socket
“Switching on
To switch on the set, press the POWER key. A green indicator comes on and the screen lights up. Go straight to the chapter “Switching on for the first time on page 8. If the television remains in standby mode, press the P(age) + key on the remote control.
The indicator will flash when you use the remote control.
7
