2492.3 EN
Step 3: Connecting and configuring your TV
Configuration A
Make sure DHCP/Auto IP (automatic network addressing) is enabled on your router and your PCs.
On most of the recently purchased PCs and routers, automatic network addressing is already enabled.
You can check this on your PC with the Network
Utility on the supplied 
CD.
Connecting your TV
&Push one end of an Ethernet cable (a straight cable) into the NETWORK connector at the bottom of the TV.
Straight cable
éPush the other end into a free Ethernet connector on your router.
“Go to ‘Viewing multimedia content’ on p. 6 to test your connection.
Configuration B
Make sure DHCP/Auto IP (automatic network addressing) is enabled on your PC.
On most of the recently purchased PCs, automatic network addressing is already enabled.
You can check this on your PC with the Network
Utility on the supplied 
CD.
Connecting your TV
&Push one end of a crossed Ethernet cable (a crossed cable) into the NETWORK connector at the bottom of the TV.
Warning !
Crossed cable
éPush the other end into the free network connector on your PC.
“Go to ‘Viewing multimedia content’ on p. 6 to test your connection.
5
