12

Switching channels

Press CHANNEL + / − on the side of the TV. For digital channels, press
a number (1 to 999) followed by a dot “•” and then the corresponding
sub channel number (1 to 999). e.g. 108.30.
• Press CH + / − or enter a number on the remote control.
• Press PREV. CH to return to the previously viewed channel.
5 Use your TV
This section helps you perform basic TV operations.

Switching your TV on or to standby

To switch on
• Press
. POWER at the side of the TV or press .
(Standby-On)
on the remote control.
To switch to standby
• Press
. POWER at the side of the TV or press .
(Standby-On)
on the remote control again.
Note
• Energy consumption contributes to air and water pollution. When the AC power
cord is plugged in, your TV consumes energy. Your TV has very low standby power
consumption.
EN