8

Positioning the TV

Warning
• Do not insert the AC power cord into the power socket outlet before all the
connections are made.
• Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.
• Before you move the TV, disconnect the cables to prevent breakage.
In addition to reading and under standing the safety instructions,
consider the following before positioning your TV :
• Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
• If the TV is mounted on a swivel base, ensure that no strain is
placed on the AC power cord when the TV is swiveled. Strain on
the AC power cord can loosen connections.
• The ideal viewing distance for watching TV is three times its screen size.
• Position the TV where light does not fall on the screen.
• Connect your devices before you position the TV.
Using a Kensington lock
There is a Kensington security slot on the back of the TV. Prevent theft
by looping a Kensington lock between the slot and a permanent object,
such as a heavy table.
AC IN

Adjusting the swivel angle

You can adjust the viewing angle of your TV.
Top of the unit
approx.
approx.
15°
15°
approx.
approx.
15°
15°
approx.
approx.
15°
15°
approx.
approx.
15°
15°
Caution
• While adjusting the swivel angle of your TV, hold the base fi rmly to prevent the TV from
tipping over and falling down.

Installing the remote control batteries

1 Slide the battery cover off the back of the remote control.
2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −
ends of the batteries line up with the markings inside the case.
3 Slide the cover back into position.
Note
• Remove the batteries if not using the remote control for an extended period of time.
4 Get started

Supplied accessories

• Remote control
• 2 x AAA, 1.5V batteries
• M5 x 20 double sems screw x 4 (available for 40” and 46” only)
• AC Power cord
• Cable management tie
• User manual
• Quick Start Guide
• Netfl ix Box-insert

Mounting stand onto TV for 40” and 46”

Applicable to TVs without mounted bases.
1

x 4

2
Note
• To wall mount the TV, refer to the addendum.
• If you lose the stand mounting screws, please purchase 4 Philips head screws (M5×20 )
at your local store.
EN