Connecting a
IN 
AUDIO L/R + VIDEO
CABLE
OUT
RF IN 
Note
•Only the left loudspeaker reproduces sound for mono equipment. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
•When you connect cables, match the cable colors to the connectors on the TV.
Connecting the TV to the internet using an Ethernet cable
LANWAN
1 2 3 4 5
Hub or
broadband router
Ethernet cable
Internet
LAN
Connecting a digital home theater amplifier using a digital |
|
audio coaxial cable | h |
| E nglis |
OUT 
DIGITAL AUDIO
IN
digital home theater amplifier
Note
•Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over Digital Audio Output for certain channels, shows or segments during the broadcast.
Telecommunications
Ethernet cable
equipment (modem, etc.)
Note
•Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment.
•After connecting a Ethernet cable, set up necessary network settings.(For the network setup, refer to ‘Network’ on page 26)
•Do not insert any cable other than a Ethernet cable to the LAN terminal to avoid damaging the unit.
•If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router.
•If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, use a hub.
•For a broadband router, use a router which supports
•Do not connect your PC directly to the LAN terminal of this unit.
EN 35
