6 Hotel Setting
Press M on the Setup Remote Control to display the Hotel Setup Menu.
Hotel and Room Information
Select this option can set the hotel information to customer.
■Hotel Name: Use the virtual keyboard to enter the Hotel Name
■Hotel Phone Number: Use the virtual keyboard to enter the Hotel Phone Number
■Room Number: Use the virtual keyboard to enter the Room Number
Channel Map Setup
Current Channel Setup:
■Channel: Press
•For cable mode, select a number between
•For antenna mode, select a number between
■Input: selection of input source. External input can also be assigned to a program number.
■Channel Logo: Press ► to enter a page containing logos, press ▲▼ to select a logo for the channel. Press E button on the
■Digital: Press Yes to select the digital channel.
■RF Channel Number: corresponds to Digital Major Channel:
•Press
■MPEG Program Number: corresponds to Digital Minor Channel.
•Press
■Rings: This option define which Ring is to be currently used by the TV for Hotel guest viewing. The default is Ring 1, and only those channels marked as valid Ring1 channels are accessible on the TV.
■SmartGuide: This option allows selection of different category option (High Definition, Sports, News, etc).
■Label: This option assigns a (text) channel label to the current TV channel. The channel label will be displayed on the top of the screen during the changing of channels.
■Mute: Mute allows you to customize the video and/or audio muting of the current TV channel setup.
•Set to Audio, the current TV channel will be audio muted.
•Set to Video, the current TV channel will be video blanked.
■Auto Install: “Start”
Note
It is important to understand the difference between physical channel numbers and TV program numbers. When Auto Install is selected, the TV first scans for digital channels, starting at a physical (RF) channel 2 and then increasing in frequency to 3, 4, .... The first digital
program it finds will be installed on TV program 1, the second on TV program 2 etc. Then the TV scans for analog channels. For the sake of discussion, let’s assume that the TV found 36 digital programs. Then the first analog channel found would be installed as TV program 37, the second as TV program 38 etc. This could be a big change as most hybrid analog/digital systems have the analog programs on the lower physical channels and the digitals on the higher. But this is only the initial order that the Auto Install creates - the final order of the channel map that you wish to present to the guest is fully programmable.
■Cable Tuning: “Yes”, “No”
17
