2.5
Network

Wireless connection

What you need
To connect the TV wirelessl y to the Internet, you need a
wireless router. Use a high-speed (broadband) connection to
the Internet.
Media server software
With m edia s erver s oftware on your comput er, you can open
your photos, m usic and vi deos stored on your computer on
your TV s creen.
Use a recent version of media server software like Windows
Media Player 11, Twonky™ or similar*.
Install the software on your computer and set it up to share
your media fi les with the TV. Read the manual of the media
server software for more information.
To open your files on the TV, the media server software must
be running on your computer.
* In Help, press * List and look up Media server software,
supported for an overview of supported media server software.
Make the connection
Follow steps 1 to 5.
Step 1 - Make sure that the router of your wireless n etwork is
switched on.
Step 2 - Press h and select S Setup and press OK.
Step 3 - Select Connect to network and press OK.
Step 4 - Select Wirele ss and press OK.
Step 5 - Select Scan to scan for your wireless network. If you
have a router with WPS (Wi-Fi Protected Setup), you can
select WPS. Select your choice and press OK.
- Scan
Select Scan to scan for your wireless network (your wireless
router). The TV mi ght fin d seve ral wire less networks in your
proximity.
- WPS
If your router has WPS, you can di rectly connect to the router
without scanning. Go to the router, press the WPS button and
return to the TV within 2 m inutes. Then press Connect to
make the connection.
If you have devices i n your wireless n etwork that use the WEP
security encryption system, you cannot use WPS.
If you must us e the WPS pin code to connect, select Scan
instead of WPS.
Step 6 - In the list of networks found, select your wireless
network and press OK.
If your network is not in t he list becaus e the network name i s
hidden (you switched off the SSID broadcast of the router),
select Manual entry to enter the network name yourself.
Step 7 - Depending on the type of router, you can now enter
your encryption key (WEP, WPA or WPA2). If you entered the
encryption key for this network before, you can select Next to
make the connection immediately.
If your router supports WPS or WPS pin, you can select WP S,
WPS pin or Standard. Select your choice and press OK.
- Standard
Select Standard to enter the encryption key (password,
passphrase or security key) manually. You can use the
keyboard on the RC to ente r the e ncryption ke y. Once you
have entered the key, press Connect.
- WPS pin
To make a secured WPS connection with a PIN code, select
WPS pin and press OK. Write down the 8-digit PIN code
shown and enter it in the router software on your PC. Return
to the TV and press Connect. Consult the router manual on
where to enter t he PIN code in the router software.
Step 8 - A message will be shown when the connection is
successful.
Network configuration
If the connection fails , you can check the DHC P setting of the
router. DHCP s hould b e se t to On.
Alternatively, if you are an advanced user and want to install
your network with static IP addre ssing, set the TV to Static IP.
To set the TV to Static IP, press h and select S Setup and
press OK . Select Network settings > Network configuration
> Static IP. With Static IP selected in the menu, you can set
the IP address and other neces sary settings in Static IP
configuration in the same menu.
Network problems
Wireless network not fo und or distorted
Setting up / Network 7