Philips 42PFL9742D/19 manual Connections setup, Digital Audio In if present, Audio In L/R

2661.1 eng 03-07-2007 11:57 Pagina 41

7.4Connections setup

When all devices have been connected the TV needs to know what connections you have made, which device is connected to which connector.

7.4.1Digital Audio In (if present)

If you use the Digital Audio In connection,

assign this connection, in the menu, to the device from where the sound comes from.

‡Press Menu on the remote control and select TV menu > Installation > Connections > Digital Audio In.

®Press navigation key right to enter the list.

ÒPress navigation key up or down to select the connector used by the device.

Connections						DIGITAL AUDIO IN
EXT		1	None
	EXT			1
EXT					2
	EXT			2
EXT					3
				HDMI 1			EXT			3
		HDMI 1
						HDMI 2
Side
							HDMI 2
AUDIO IN L/R					Side
DIGITAL AUDIO IN

7.4.2Audio In L/R

If you use the Audio In L/R connection, assign this connection, in the menu, to the device from where the sound comes from.

‡Press Menu on the remote control and select

TV menu > Installation > Connections > Audio In L/R.

®Press navigation key right to enter the list.

ÒPress navigation key up or down to select the connector used by the device.

Connections					AUDIO IN L/R
None
		EXT	1
EXT 3
			EXT	2
		HDMI 1
EXT	3
		HDMI 2
				HDMI 1
			HDMI 2
Side
AUDIO IN L/R

7.4.3Naming your devices

Name the connected devices for easy selection and best signal handling.

Assign the type of device (DVD, VCR, Game ...) to the connector you use for that device.

‡Press Menu on the remote control and select

TV menu > Installation > Connections > EXT1.

®Press navigation key right to enter the list.

ÒPress navigation key up or down to select the type of device.

† Press Menu to quit the menu.

Connections								EXT 1
EXT	1	None
DVD
				EXT	2
Blu-ray
	EXT	3
HDD/DVDR
					HDMI 1
			HDMI 2				HD rec.
Side			Game
AUDIO IN L/R

7.4.4Decoder channels

Decoders that decode an antenna channel are connected to EXT1 or EXT2 (scart).

You have to assign the TV channel as a channel to be decoded. Then assign the connection where the decoder is connected.

‡Press Menu on the remote control and select

TV menu > Installation > Decoder > Channel.

®Press navigation key right to enter the list.

ÒPress navigation key up or down to select the channel to decode.

† Press navigation key left and go back to select Status.

º Press navigation key up or down to select the connector used by the decoder.

◊Press Menu to quit the menu.

ENGLISH

Connections 41