2664.1 eng_aurea_AP 27-09-2007 12:32 Pagina 34

6.4Automatic channel management

Once a day, at 3 AM, all available TV channels are updated automatically. The update is done if your TV is in standby.

Earlier stored channels not found by the update will be removed from the channel list.

You can do this update yourself anytime.

Press Menu on the remote control and select TV menu > Installation > Channel installation > Installation update.

®Press navigation key right to enter the Installation update menu.

ÒPress OK.

Press the green key to start.

The update starts and may take a few minutes.

ºWhen the update is completed, press the red key to return to the Channel installation menu.

Press Menu to quit the menu.

6.5Factory settings

If you are lost in the picture, sound and Ambilight settings, you can reset the TV to the factory settings of picture, sound and Ambilight

Press Menu on the remote control and select

TV menu > Installation > Factory settings.

®Press navigation key right to enter the Factory settings menu.

ÒPress OK.

Press Menu to quit the menu.

rNote

The channel installation settings are not changed.

34

Use more of your TV

Page 34
Image 34
Philips 42PFL9900/98 manual Automatic channel management, Factory settings, Channel installation settings are not changed