Philips 49PFL4609, 43PFL4909, 43PFL4609, 65PFL4909, 55PFL4909 Network settings assistant

Network

Set up Network connection settings in order to use Net TV or Network Upgrade function.

●The meanings of abbreviations are defined as below.

AP	: Wireless LAN Access Point
WPS	: Wi-Fi protected Setup
SSID	: Wireless network name

●The key entry screen will appear when you select SSID, WEP / WPA / WPA2 or Proxy address.

―

1	2	3	4	5	6	7	8	9	0
a	b	c	d	e	f	g	h	i	j
k	l	m	n	o	p	q	r	s	t
u	v	w	x	y	z	.	-	_
	Clear	All clear			a/A/@		Cancel		OK

●Enter the key of the selected wireless network using H I J K, then press OK.

Clear	: Clear the entered number or word.
All clear	: Clear all the entered numbers or words.
a/A/@	: Switch between abc, ABC and @!?
Cancel	:	Shows the cancellation display.
OK	:	Set the entered number or word.

1Use H I to select Network, then press OK.

Settings assistant	Language	English
Picture	Channels	Autoprogram
Sound	Preferences	Location
Features	Network	Network settings a
Installation	Restore default settings	Reset AV settings
Software

40 .English

Network settings assistant

Before you proceed to Connection test or other settings in Network section, run the Network settings assistant to connect the TV to your Network.

2Use H I to select Network settings assistant then press OK.

Language	Network settings assistant	Start now
Channels	Manual network settings	Network selection
Preferences	Connection test	Start now
Network	Setting status	Information
Restore default settings Home network		Renderer
	Reset network settings	Start now

3Press OK to select Start now.

Wireless setting

Select to use a wireless LAN to connect to the internet by a wireless connection.

4Use H I to select Wireless, then press OK.

This TV can be connected to your	Wireless
home network.
Select your connection type.	Wired
If not connected to the network,
the latest TV software can be
downloaded from
www.philips.com/support

Cancel

5Use H I to select the desired setting, then press OK, and follow the On-screen Instructions.

	Select this setting if your router has a Wi-Fi
	Protected Setup (WPS) button. Start scanning
Easy Connect	for wireless networks on the TV after pressing
	the WPS button on your router. If connection
	test fails, try Easy Connect again.* If it fails then
	refer to the router’s manual for more details.
Scan	Search for Wireless Networks automatically and
	select the Wireless Network name (SSID) from
	the list. Wireless network setting L p. 41
Manual	Set up the connection to the Wireless LAN
	Access Point (AP) (e.g. wireless router) manually
	by entering the Wireless Network name (SSID).

*WPS (Easy Connect) cannot be used when the security protocol is set to WEP. Change the Access Point’s security mode from WEP to WPA or WPA2 (recommended).

Wired setting

Select to use an Ethernet cable to connect to the internet by a wired connection. Please purchase shielded Ethernet cables at your local store and use it when you connect to Network equipment.

4Use H I to select Wired, then press OK.

● Connection test will start automatically. L p. 43

Continued on next page.