Philips 49PFL4609, 43PFL4909, 43PFL4609, 65PFL4909, 55PFL4909, 32PFL4609 Useful tips, Question Answer

52 .English

6 Useful tips

FAQ

	Question					Answer
		●		Check the Antenna or Cable Connection to the Main Unit.
		●		Check the Batteries on the Remote Control.
		●		Check if there is an obstacle between the infrared sensor window and the Remote Control.
My Remote Control does		●		Test the IR Signal Output use IR Signal Check. L p. 55
				If okay, then possible Infrared Sensor trouble.
not work.		●		Aim the Remote Control directly at the infrared sensor window on the front of the Unit.
What should I do?		●		Reduce the distance to the Unit.
		●		Re-insert the Batteries with their Polarities (+/–) as indicated.
		●		When there is an infrared-equipped device such as PC near this Unit, it may interrupt the Remote Control signal on this
				Unit. Move the infrared-equipped device away from this Unit, change the angle of the Device's infrared sensor or Turn
				Off the infrared communication function.
	How come the Initial Setup
	appears every time I Turn		●	Make sure to complete the Initial Setup before the Unit goes into Standby mode.
	On this Unit?
		●		Autoprogram must be completed when you Set Up the Unit for the First time or Move it to a location where previously
				unavailable channels are broadcast.
		●		Make sure Autoprogram has been completed. L p. 37
Why can I not watch some		●		The selected channel may not be broadcasting.
		●		When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the
RF signal TV Programs?
				Autoprogram. L p. 37
		●		The selected channel cannot be viewed by the Child and Ratings Lock setting. L p. 34
		●		The Unit requires some kind of Antenna Input. An indoor Antenna (Digital or VHF / UHF), an External Antenna (Digital
				or VHF / UHF) or an RF Coaxial Cable from your wall Cable / Satellite Set-top Box needs to be plugged into the Unit.
	How come there is no		●	Check if the correct Input mode is selected by pressing			S	SOURCE	. L p. 23
			●	Check the Antenna, Cable or other Input Connection to the Unit.
	image from the Connected
				When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors
	External Devices?		●
				are connected to their corresponding colored jacks on the Unit.
When I enter a channel			●	Many Digital channels have alternate channel numbers. The Unit changes the numbers Automatically to the ones signifying
number, why does it change				the Broadcasting Station's channel number. These basic numbers used for the previous Analog Broadcasts. (e.g., Input
Automatically?				Digital ch# 30 Automatically changes to Digital ch# 8.1)
	Why are captions not		●	Closed Captions that are delayed a few seconds behind the actual dialog are common for Live broadcasts. Most captioning
	displayed Entirely?
				production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective
	Or why are captions
				editing is used to insure that the Closed Captions remain up-to date with the current TV screen dialog.
	delayed behind the dialog?
How can I set the clock?			●	There is No clock function on this Unit.
	My PIN code no longer		●	Although the default PIN code (0000) is supplied with the Unit, the PIN code will be required once you set a PIN code
	works, how can I change the			in	Child and ratings lock	. L p. 34 When you forget your PIN code, enter 0711 in				Change PIN	to reset the PIN code.
	Child Lock setting?			L p. 36
When I start up the TV or				When you start up the TV or a net service after executing the software update, a message may appear on the screen
a net service, a message		●
appears on the screen				prompting for software update again. In this case, please select Update to start USB update or network update. L
prompting for software				p. 45
update again.

Continued on next page.