Philips 60PP9502, 55PP9502 manual Connecting AN S-VIDEO Device, CH3CH4

Press the AV button on the remote con- trol as many times as necessary to select the AV2 source on the TV.

Connecting Accessory Devices to Your TV

CONNECTING AN S-VIDEO DEVICE

The S(uper)-Video connection on the rear (and side panel) of the TV can give you better pic-

ture detail and clarity for the playback of S-VHS VCR tapes or DVDs than the normal antenna (RF signal) or Video (composite) picture connec- tions. The example given connects a DVD/VCR Combi unit to the INPUT-AV 2 jacks on the rear of the TV.

NOTE: The accessory device must have an S-VIDEO output jack to make the connection

ANTENNA IN 75Ω	AMP SWITCH				Rear of TV
	EXT	INT
+		_
					HD INPUT-AV 5
				DVI
CENTER CHANNEL AMP INPUT
				2	HD INPUT-AV 4
					G/Y
INPUT-AV 1		OUTPUT	INPUT-AV 2		R/Pr

explained on this page.

To make the connections, you will need:

•one S-Video cable

•two cables for audio connections (standard RCA connectors).

NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039.

BEGIN

Rear of Device with		DVD/VCROUT
S-VIDEO Output* IN
ANTANT-OUT-IN	RAUDIOVIDEOL
	CH3CH4

	Y		B/Pb
VIDEO
S-VIDEO		S-VIDEO
L	Pb	L
			V
L		L	L	L
			SYNC
AUDIO	Pr	AUDIO	AUDIO	AUDIO
			H
R		R	R	R
AUDIODVD/VCROUTLR		1	DIGITALAUDIOOUTCOMPNENT
			SPCM-VOIDUTEO/BITSTREAMOPTICALCOAXVIDEOYIAL		OUT	CbCr

*(Example: Philips DVD/VCR Combi model DV910VHS)

1 Connect the S-VIDEO OUT jack on the rear of the accessory device with S-VIDEO output to the INPUT-AV 2 S-VIDEO jack on the rear of the TV.

2 Connect the DVD/VCR AUDIO OUT jacks on the rear of the accessory device to the INPUT-AV 2 AUDIO input jacks on the rear of the TV.

3

4 Turn the accessory device on and press play to view the video source material (DVD or videotape, for example) on the TV.

AV2

POWER

TV	VCR	ACC
		ACTIVE
SWAP	PIP CH	CONTROL FREEZE
DN	UP
SOUND		PICTURE
STATUS/		MENU/
EXIT		SELECT
	MUTE
VOL		CH

	1	2	3
	4	5	6
	7	8	9
	TV/VCR	0
3	A/CH		SURF
	SURF		PIP ON/OFF
	REC •	FORMAT	SLEEP

HELPFUL HINTS

•To simplify making connections, audio cables are often color coded: red for the right channel, and white for the left chan- nel. The jacks on your TV are likewise color coded to match the connectors. To make S-Video connections, you must use an S-Video cable.

•You can also connect a satellite receiver, laser-disc player, video-game player, or other accessory device with S-Video capability to the TV in a manner similar to example shown on this page.

•If you connect a satellite receiver to the TV, you will need to use the receiver’s channel-memorization system to store channels in the receiver’s memory.

WARNING

Video sources that show a constant nonmov- ing pattern on the TV screen can cause pic- ture-tube damage. When you are not using your video accessory devices, turn them off. Also, regularly alternate the use of accessory video sources with normal TV viewing. See page 62.

	SAP
AV	DOLBY V PROG.LIST

ITR/	HOME	HOME PERSONAL
RECORD	VIDEO	MOVIES

13