Using the Onscreen Submenus: Picture
ADJUSTING THE MANUAL CONVERGE CONTROLS: CONVERGE RED/BLUE
As explained in the Quick Use and Setup Guide, your projection TV has three color
projection tubes: one for red, one for green, and one for blue. When mixed in proper proportion, the beams of light coming from the tubes can produce any color. To create a clear picture, however, these color beams must be precisely aligned. This alignment is called convergence. Bumps and vibrations, moving the set, or the presence of magnetic fields can cause the color beams to become improperly aligned, or mis- converged, resulting in a fuzzy picture. Using the Auto IntelliSense™ feature, you can auto- matically adjust convergence in 20 seconds or less. See page 7 in the Quick Use and Setup Guide. Also, if you desire, you can use the MANUAL CONVERGE
NOTE: Allow the TV to warm up for 20 minutes before adjusting convergence.
BEGIN
1 Press the MENU/SELECT button to show the onscreen menu. Press the CURSOR RING RIGHT to enter the PICTURE submenu. Then press the CURSOR RING DOWN repeatedly until MANUAL CONVERGE is highlighted.
2 Press the CURSOR RING RIGHT to enter the MANUAL CONVERGE submenu. If you want to adjust the Red Convergence, press the CURSOR RING RIGHT to enter the adjust mode. To adjust the Blue Convergence, press the CURSOR RING DOWN to highlight CONVERGE BLUE, then press the CURSOR RING RIGHT to enter adjust mode.
3 In adjust mode, press the CURSOR RING RIGHT, LEFT, UP, or DOWN to adjust the cross hair until the color outline around it is gone. (The adjust- ment is automatically saved in the TV’s memory.) To return to the MANUAL CONVERGE menu, press the MENU/SELECT button. To exit the onscreen display, press the STATUS/EXIT button.
PICTURE
MANUAL CONVERGE
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT
POWER
TV | VCR | ACC |
|
SOUND |
| ACTIVE | 2,3 |
SWAP | PIP CH | CONTROL FREEZE |
|
DN | UP |
|
|
STATUS/ |
| MENU/ |
|
EXIT |
| SELECT | |
| MUTE |
| 1 |
VOL |
| CH | |
1 2 3
4 5 6
7 8 9
TV/VCR
A/CH | 0 | SURF |
POSITION |
| PIP |
Converge Red
Converge Red
Determining Which
Manual Converge
Control to Use
Screen |
|
appearance | Action |
|
|
| Adjust the |
| CONVERGE |
Various | RED control. |
images | Then if any red |
throughout | outlines remain, |
the entire | adjust the |
picture have | MULTIPOINT |
red outlines. | RED control. |
| Adjust the |
| CONVERGE |
Various | BLUE control. |
images | Then if any blue |
throughout | outlines remain, |
the entire | adjust the |
picture have | MULTIPOINT |
blue outlines. | BLUE control. |
33
