Philips 60PP9502, 55PP9502 manual Hd Input-Av

Appendix A

COMPATIBILITY INFORMATION FOR THE TV’S HIGH-DEFINITION INPUTS A

Your set’s HD inputs (HD INPUT-AV 4 and HD INPUT-AV 5) are designed to accept

high-definition signal standards 480p and 1080i as specified by the Electronic Industries Association. Output standards may vary by man- ufacturer. Refer to the directions-for-use manual for the digital equipment before connecting.

HD INPUT-AV 4

When the Inputs Are Used with Component Video Signals

Y INPUT: 1.0 Vp-p (includes sync), 75 ohms

Pr INPUT: 700m Vp-p, 75 ohms

Pb INPUT: 700m Vp-p, 75 ohms

NOTES:

Your TV’s HD input jacks are compatible with some digital equipment having RGB outputs with “sync on green” or RGB with “separate H and V sync.” As with HD component video signals, out- put standards may vary by manufacturer. Refer to the directions-for-use manual for the receiver before connecting.

The Pb INPUT jack can also receive signals from outputs labeled Cb or B-Y. The Pr INPUT jack can also receive signals from outputs labeled Cr or R-Y.

When the Inputs Are Used with RGB Video Signals

G/Y: 1.0 Vp-p, 75 ohms (compatible with sync on green)

R/Pr: 700 mVp-p, 75 ohms

B/Pb: 700 mVp-p, 75 ohms

H:3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync)

V:3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync).

HELPFUL HINTS

•No industry standards have been estab- lished for HD television RGB signal sys- tems, timing, synchronization, and signal strengths. The HD INPUT-AV 4 RGB inputs on your Philips TV will not be compatible with all digital equipment that offers RGB outputs. If the digital equip- ment you want to connect offers both component video and RGB, component video is the suggested type of connection to use.

•Your TV’s onscreen INSTALL submenu provides the option of switching the AV4 signal source between YPbPr and RGB color-space settings. The option is avail- able only when you have selected the AV4 signal source (using the AV button on the remote or the Source Select button on the TV). The default setting for AV4 is YPbPr. See page 61.

HD INPUT-AV 5

This input accepts a 24-pin digital visual interface (DVI) connector, which uses digital data in the format data standard called transition minimized differential signaling (TMDS).

59