iProntoUser Guide
15
Getting the iPronto Up and Running
■Status: On this tab you get an overview of your network settings. You can also check the network signal strength
here.
■About: On this tab you read information about licence terms and agreements. When you tap the ‘Upgrade iPronto’
button, the iPronto checks if updates of your software are available. When there are updates available, you can
download them from the Internet immediately. With the ‘Reboot iPronto’ button you can quickly reboot your iPronto.
Note While adjusting the System Settings, it is useful to operate the touch screen with the stylus. See The Touch Screenon
page 27 for more information.
Setting up Your iPronto
After installing the Wireless LAN Adapter and the battery, you need to calibrate your touch screen and define the
settings on your iPronto, such as time and date, brightness, time out and so on. These settings are necessary to make
your iPronto function properly.
The first time you activate your iPronto, the System Settings will automaticallyappear on the screen.
To access the System Settings later, follow this procedure:
Press and hold the scroll wheel for 5 seconds.
The page turns to its flipside.
To exit the System Settings:
Press the scroll wheel again.
-or-
Tap the View Control button in the lower left corner of the touch screen.
The page turns to its normal view.
iPronto 1.6 IFU En .qxd 22-04-2004 17:23 Pagina 15