AZ 1150 /00 page 17
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee.
English
|
|
|
|
|
| Problem | Solution | ||
|
|
|
| |
| No sound / No power | – Volume not adjusted. Adjust the VOLUME | ||
|
| – Mains lead not securely connected. Connect AC mains | ||
|
| lead properly | ||
|
| – Batteries exhausted /incorrectly inserted. Insert (fresh) | ||
|
| batteries correctly | ||
|
|
|
| |
| Display does not function | – Electrostatic discharge | ||
| properly/ No reaction to | Switch off and unplug the set. Reconnect after a few | ||
| operation of any of the | seconds. | ||
| controls |
|
|
|
|
|
|
| |
| Err, no Cd or nF dISC | – No CD inserted. Insert a CD | ||
| indication | – CD damaged or dirty. Replace/ clean CD (see | ||
|
| maintenance) | ||
|
| – Laser lens steamed up. Wait until lens has cleared | ||
|
| – | ||
|
| finalized | ||
|
|
|
| |
| The CD skips tracks | – Disc damaged or dirty. Replace or clean disc | ||
|
| – SHUFFLE or a program is active | ||
|
| Quit SHUFFLE / program mode(s) | ||
|
|
|
| |
| Sound skips during | – MP3 file made at compression level | ||
| MP3 playback | exceeding 320kbps | ||
|
| Use a lower compression level to record CD tracks into | ||
|
| MP3 format | ||
|
| – Disc damaged or dirty. Replace or clean disc | ||
|
|
|
| |
| Cannot find desired | – Wrong file extension used | ||
| MP3 track | save file as .MP3 | ||
|
|
|
|
|
17
