User Manual BDL3231/BDL4231
1.3CLEANING & CARE
•To avoid possible shock hazard, please be sure that the monitor is unplugged from the electrical outlet before cleaning.
•When cleaning the monitor screen, take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive).
•Wipe the front of the screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.
•Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean dry cloth to dry the wiped surfaces.
•Occasionally vacuum the ventilation holes or slots in the cabinet back.
•Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.
•Do not allow a still image to be displayed for an extended period of time as this can cause a permanent
1.4OHTER RELATED INFORMATION
1.4.1 INFORMATION FOR USERS IN THE U. S.
For units set at 115 V :
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of
For units set at 230 V:
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of
1.4.2 INFORMATION FOR USERS OUTSIDE THE U.S.
For units set at 230 V:
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated 15 A, 250 V. The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed and / or be marked HAR.
