Philips BDP5510 user manual Advanced options clear memory, Update software via the Internet

Advanced options (clear memory...)

1 Press .

2Select [Setup] > [Advanced] to access the advanced setup options.

[BD-Live security]: Restrict or allow access to BD-Live (only for non- commercial, user-created BD-Live discs).

[Downmix mode]: Select 2-channel stereo audio output to a TV or to a receiver with left and right Dolby surround.

[Software update]: Select to update software from a network or from USB storage device.

[Clear memory]: Delete the previous BD-Live download on the USB storage device or SD card. A "BUDA" folder is automatically created to store the BD- Live download.

[Local storage]: Select a USB storage device or SD card to store the

[DivX® VOD Code]: Display the DivX® registration code or the deregistration code for this player. [Version information]: Display the software version of this player. [Restore default settings]: Reset this player to the default settings made at the factory, except for password and parental control level.

Note

You cannot restrict Internet access on commercial Blu-ray discs.

Before you purchase DivX videos and play them on this player, register this player on www.divx.com with the DivX VOD code.

4 Update software

Before you update the software of this player, check the current software version:

Press , and then select [Setup] > [Advanced] > [Version information], and press OK.

Update software via the Internet

1Connect the player to the Internet (see "Set up a network").

2 Press , and select [Setup].

3Select [Advanced] > [Software update]> [Network].

»If an upgrade media is detected, you are prompted to start the update.

4Follow the instructions on the TV screen

to update the software.

»

player automatically turns off and on again.

Update software via USB

1Check the latest software version on www. philips.com/support.

Search for your model and click on "Software and drivers".

2Download the software into a USB storage device.

a Unzip the download, and make sure that the unzipped folder is named "UPG_ALL".

b Put the "UPG_ALL" folder in the root directory.

20EN