Philips CDR 760 Erasing & Playing, Erasing CD-RW discs, Playing a CD, To erase the last track

English

ERASING & PLAYING

Erasing CD-RW discs

For CD-RW discs only.

You can erase:

-track by track from the end.

-the entire disc.

To erase the last track :

1Make sure the disc is not finalized (Showing OPC on display during start up). Otherwise unfinalize first (p. 15)

2Press ERASE.

➜ On the display, TRACK and ERASE will flash.

DIG AUTO TRACK REPEAT 1 TOTAL REM	TRACK TIME CD SYNC
LOG		RECORD
		FINALIZE
PROG		ERASE
		COPY

3Press RECORD within 3 seconds.

➜ TRACK and ERASE light continuously during erasure.

To erase the entire disc:

1Press ERASE once (for finalized CD-RW) and twice (for unfinalized CD-RW).

➜ On the display, DISC and ERASE will flash.

DIG AUTO TRACK REPEAT 1 TOTAL REM	TRACK TIME CD SYNC
ALOG		RECORD
		FINALIZE
PROG		ERASE
		COPY

2Press RECORD within 3 seconds.

➜ DISC and ERASE light continuously during erasure.

Erasure of a complete disc may take up to 1.5 minutes.

Playing a CD

PLAY	PAUSE
			STOP
				R
				ECORD	FINAL
C
D - R
	E C O
	R D A
	B L E		R E
		/
			W R
			I T A	B L E
	Power
	On/Off

1Press PLAY to start CD play.

➜The track number and track time appear on the display, together with the record/play level indicator.

2Press Display once, twice, or three times to see:

➜remaining track time; Total remaining time; Track time with the record/play level bar off.

3To interrupt play temporarily, press PAUSE. ➜ PAUSE will light up on the display

4To continue play, press PAUSE again or press PLAY.

5To stop play, press STOP.

➜ The number of tracks and the total playing time will

appear on the display.

16