Start digital recording

1With the recorder stopped, press RECORD to enter the Record standby mode.

RECORD will flash.

DIG AUTO TRACK REPEAT 1 TOTAL REM

TRACK TIME CD SYNC

 

ANALOG

 

 

 

 

 

 

 

RECORD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FINALIZE

 

PROG

 

 

 

 

 

 

 

ERASE

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COPY

 

 

RECORDABLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If DIG also flashes, the digital connection is incorrect.

2To start recording, press PLAY and immediately start the source (from stop mode).

RECORD lights continuously. The track number and recording time used will be indicated on the display.

To record a 3-second silence at the start of a track, press

PAUSE.

To check the (remaining) recording time, press DISPLAY. (This can also be done during the recording.)

3To stop recording, press STOP on the CD recorder. RECORD will go out.

To interrupt recording, press PAUSE.

RECORD starts to flash. Resume at step 2.

After recording the display will show UPDATE for several seconds.

Note: With AUTO TRACK on, the recorder will stop automatically. Recordings from DAT or DCC will stop after 20 seconds silence. With AUTO TRACK off, the AUTO STOP mode is disabled.

RECORDING

Synchronized digital recording - CD-SYNC

R

 

 

ECORD

FINA

 

 

LIZE

ERASE

CD-

 

 

 

 

 

 

 

 

 

 

 

 

Sync

 

 

 

 

 

 

 

 

 

 

 

 

DIG

 

 

 

 

 

 

 

 

 

 

 

 

TRACK

REPEAT 1

TOTAL

 

 

 

 

 

 

 

 

 

REM

 

 

 

 

PROG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TIME

 

 

 

 

 

 

 

 

 

 

 

Recordable

 

 

 

 

 

 

 

 

 

 

 

CD

RECORDABLE

L

-

 

 

 

 

 

 

 

 

 

 

 

 

-

 

 

 

 

 

 

 

 

 

 

R

50

40

-

-

 

 

 

 

 

 

 

 

 

 

 

30

-

 

 

 

 

 

 

 

 

 

 

 

20

-6

 

 

 

 

 

 

 

 

 

 

 

10

-3

0

 

 

 

 

 

 

 

 

 

 

 

OVER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Preparing for synchronized digital recording

The CD-SYNC feature enables you to make a fast and easy digital recording of a CD. Track increments are automatically detected from the digital source material. Track increments cannot be added manually.

1Make sure the disc is absolutely free of scratches and dust particles.

2Press Source repeatedly until (depending on the connection used):

DIG COAXIAL or DIG OPTICAL will appear on the display.

Start synchronized digital recording

1With the CD recorder stopped, press CD-SYNC.

On the display, CD-SYNC& SYNC appears. After a time, RECORD starts to flash.

DIG AUTO TRACK REPEAT 1 TOTAL REM

TRACK TIME CD SYNC

 

LOG

 

RECORD

 

 

 

 

 

 

 

 

 

 

 

FINALIZE

 

PROG

 

 

 

 

ERASE

 

 

 

 

 

COPY

 

 

 

 

 

 

If DIG also flashes, the digital connection is incorrect.

2To start recording, press Play on the digital source.

The CD recorder automatically starts to record and RECORD lights continuously. The track number and recording time used will be indicated on the display

If you start the source during a track, CD-SYNC will not start recording until the beginning of the next track.

To check the (remaining) recording time, press Display. (This can also be done during recording)

3To stop recording, press STOP on the CD recorder. CD-SYNCand RECORD will go out.

To interrupt recording, press PAUSE.

RECORD will start to flash. To resume, press PLAY on the

CD recorder.

English

13

Page 15
Image 15
Philips CDR 760 Synchronized digital recording CD-SYNC, Start digital recording, Start synchronized digital recording