1 |
BASIC CABLE AND ANTENNA CONNECTIONS
Your home’s signal input might come from a single (75 ohm) round cable, a
Converter Box or from an antenna. In either case the connection to the TV is very easy.
1If your Cable TV signal or Antenna signal is a round cable
(75 ohm) then you're ready to con-
Antenna Connection
Combination
VHF/UHF Antenna
75
(Outdoor or Indoor)
300 to 75Ω | Back of TV | |
Adapter | ||
|
nect to the TV.
If your antenna has flat twin-lead
wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter.
If you have a Cable Converter
Box: Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter.
1
Twin Lead
Wire
Round Cable
75Ω
75 2
2Connect the Cable TV cable or Antenna cable (or 300 to 75 ohm adapter) to the 75Ω plug on the TV.
If you have a Cable Converter Box:
Connect the OUT(put) plug from the Converter to the 75Ω plug on the TV.
Cable/Cable Box Connection
75
HELPFUL HINT
Be sure to set the TV for the type signal you've connected (see the “Install Menu Controls” section of this manual.)
To set the TV to select only the channel numbers in your area see how to “Program" or "Add" channels in the TV’s memory, see the Auto Program section of this manual.
Cable 1
Company
Signal
IN | OUT |
|
Cable Box
Back of TV
75
Round Cable | 2 |
75Ω |
5
