5 |
AV1 AUDIO/VIDEO INPUT CONNECTION
The TV’s audio/video input jacks are for direct picture and sound connections
between the TV and a VCR (or similar device) that has audio/video output jacks. Follow the easy steps below to connect an accessory device to the AV 1 Input Jacks located on the back of the TV.
1 Connect the VIDEO (yellow) cable to the VIDEO AV1 in jack on the back
| 1 | Back of TV | |
|
|
| |
2 |
| Monitor |
|
VIDEO | out in |
| |
AUDIO
R
of the TV.
2 Connect the AUDIO (red and white) cables to the AUDIO (left and right)
AV1 in jacks on the rear of the TV.
3 Connect the VIDEO (yellow) cable to the VIDEO OUT jack on the back
of the VCR.
4 Connect the AUDIO (red and white) cables to the AUDIO (left and right)
Audio Cables
(Red & White)
OUT
R AUDIO L
4 | IN |
Video Cable
(Yellow)
OUT | ANTENNA |
|
| IN | 3 |
IN | ANTENNA | |
VIDEO |
|
OUT
Back of Typical VCR
OUT jacks on the rear of the VCR.
5 Turn the VCR (accessory device) and the TV ON.
6 Press the AV button on the remote control to select the AV1 channel. AV1 will appear in the upper left corner on the TV screen.
7 With the VCR (or accessory device) ON and a prerecorded tape (CD, DVD, etc.) inserted, press the PLAY
button to view the tape on the tele-
5 7
VCR with
Audio/Video Outputs
6
VOL
vision.
HELPFUL HINT
All the AV channels can be selected by pressing the Channel + or – buttons. The AV channels can also be added to the QuadraSurf™ buttons for quick access.
9
