9 Troubleshooting
Warning!
•Risk of electric shock. Never remove the casing of this unit.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following points before requesting service. If the problem remains unsolved, register your product and get support at www.philips.com/welcome.
Main unit
The buttons on this unit do not work.
•Disconnect this unit from the power outlet for a few minutes, then connect again.
Picture
No picture. | • | See TVs manual for correct video input channel selection. Change | |
|
| the TV channel until you see the DVD screen. | |
| • | Press DISC. | |
| • If this happens when you change the TV type setting, you have | ||
|
| to switch to its default mode: | |
|
| 1. | Press ç. |
|
| 2. | Press b. |
|
| 3. | Press SUBTITLE. |
No picture on HDMI | • Check if the HDMI cable is faulty. Replace a new HDMI cable. | |
connection. | • If this happens when you change the HDMI video resolution, | |
| you have to switch to its default mode: | |
| 1. | Press ç. |
| 2. | Press b. |
| 3. | Press ZOOM. |
40EN
1_cts4000_12_eng3.indd 40 | 10/6/2008 10:53:59 AM |
