Philips D711 manual Connector for Adapter cable SmartLine D721 only, Start up

2.4Start up

The SmartLine D711/721 is connected to an ISDN S0 DSS1 point-to-multi- point connection or to a corresponding telecommunications system.

Note: Please note that the S0 bus must be terminated on both ends with 2 x 100 Ohm.

Location

Avoid placing the telephone in the direct proximity of other electronic devi- ces such as HiFi units, office machines or microwave units, thus ruling out mutual influences. Do not place the telephone close to heat sources such as radiators.

Today's furniture is coated with a vastly diverse amount of lacquers and plastics and is treated with diverse care agents. Therefore, it cannot be ruled out that some of these substances may contain components that will be aggressive to the telephone's plastic feet and will soften them with the result that they leave behind unpleasant traces.

Connecting

Connect the handset to the housing with the coiled handset cord. Insert the end with the shorter uncoiled portion in the socket on the handset. Then connect the telephone to the telephone network by means of the telephone connecting lead. The telephone starts with a display test, during which time all pixels and pictograms are displayed for about 10 seconds. You can now make telephone calls.

Connector for
adapter cable
(SmartLine D721 only)	Telephone line

ISDN

Optionen

Options

Handset cord

Underside of SmartLine D711 / D721

10