Philips D721, D711 manual Establishing and undoing a plugged connection

Establishing and undoing a plugged connection

Insert the plug into the socket so that the locking catch points in the direction of the corresponding cut-out in the socket. Push the plug into the socket until it audibly locks.

Cut-out

Socket

Plug

Catch hook

To undo a plug-in connection, press the locking
catch in the direction of the plug and pull out the
plug at the same time.	1	2

Initial programming

.Although11) your telephone is immediately operable after connection to the telephone network, you should first adapt it to your specific needs by pro- gramming.

•MSN input (see 4.15)

•Defining the local area code (see 4.18)

•Programming the national code (see 4.16)

•Programming the international code (see 4.14)

If required, you should then:

•Change the PIN (see 4.19)

•Define a charge factor (see 4

•Program an exchange line code (only if you operate the telephone on a telecommunications system - see 4.3)

•Define barred numbers (see 4.21)

•Set ringing tones (see 3.4.7)

•Program the telephone book (see 4.22).

11