English
19
TV

Watching TV

The set can receive both Digital TV (DTV) and
Analog TV (ATV).
1Check your TV set has been properly connected
and placed. (see Installation, Connecting TV
antenna/CATV and Using the TV Screen)
2Press DTV / ATV on the remmote control to
select DTV ( Digital TV ) or ATV (Analog TV) (or
SOURCE on the set).
Pressing SOURCE can select either digital TV or
analog TV only, depending on the last selected TV
source.
3To receive cable channel, select HRC, IRC or
STD through the TV Menu Operation on the
next page (See “Setting up TV”).
4 The first time you use the TV, press and
hold PROG until the auto scann progress bar
(digital TV or analog TV) appears.
Available channels (DTV or ATV) are
programmed,
After all channels are stored, the first
autostore channel will then automatically play.
5Press PRESET / CHANNEL 3 4 to select
your desired channel (on the remote control, O
P CH )
or
Use the Numeric Keypad (0-9) on the
remote control to select the channel number
directly. e.g.
Channel 2: Press 0 and then, 2
Channel 10, Press 1 and then, 0
For Digital TV, you also need to press /GOTO
on the remote control to enable sub-channel
selection, then input your desired sub-channel
number.
Helpful hints:
–To receive the cable channels, you must connect
your TV to the cable TV outlet using a CATV cable
(not supplied), and program your TV by select TV
source (HRC, IRC or STD) in the TV menu
according to your region.
Using EPG (Electronic Program Guide) -
Digital TV only
In Digital TV, you can access EPG content which
may include program availability, backgroud
information, etc..
1In Digital TV, press EPG on the remote control
to turn on EPG information.
2If necessary, use 3 / 4 / à / áand OK on
the remote control to select and confirm your
selection.
3To turn off EPG, press EPG again.
Turning on/off TV caption
Press CC / SUBTITLE once or more to turn
on or off TV caption (if available), or display
various caption displaying effects.
Selecting audio language (Digital TV
only)
Press AUDIO on the remote control to select
language spoken on the TV (if available).
Using ERASE/WRITE button on the
remote control
To skip a stored channel
1Selelect the channel you want to skip.
2Press once ERASE/ WRITE on the remote
control.
The current channel number appears in red.
The channel will skip when using 3 or 4 to
select a TV channel.
To restore a skipped channel to be selectable
1Use the Numeric Keypad (0-9) on the
remote control to enter the skipped channel
number.
2Press ERASE/ WRITE on the remote control.
The skipped channel will be selectableusing 3
or 4.
To store a new channel (Analog TV only)
1When a new analog channel is found, use the
Numeric Keypad (0-9) on the remote
control to enter a desired channel number.
2Press ERASE/ WRITE on the remote control.
The new channel will be stored.
pg018-pg035_DCD778_37-EngB 9/2/07, 18:5019