Installation

Rear connections

Warning:

Never make or change connections with the mains supply switched on.

Connecting FM antenna

It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit.

Fully extend the FM antenna.

Keep the FM antenna as horizontal as possible (as far away as possible from the AC adapter, VCR or other radiation sources).

Fix the antenna’s end to the wall.

Connecting TV antenna/CATV (cables not included)

As shown, plug a TV antenna (for air channel)/ CATV cable (for cable channel) into TV ANT.

Connecting an additional appliance

It is possible to use an additional appliance, e.g. VCR, video game player, with the set.

1

 

2

 

VIDEO OUT

AUDIO OUT

External AV source

1Connect one end of the AV cable (red/white/ yellow, not supplied) to AV IN jacks on the set, red plug to AUDIO IN R , white plug to AUDIO IN L, yellow plug to VIDEO IN.

2Connect the other end of the AV cable to the corresponding AV OUT terminals of the additional appliance.

Before starting operation, press TV/AV on the remote control to select “AV” in order to activate the input source.

Helpful hints:

If the connected device has only a single audio out terminal, connect it to the AUDIO IN L terminal.Alternatively, you can use a “single to double” cinch cable, but the output sound will remain mono.

Always refer to the owner’s manual of other equipment for complete connection.

E n g l i s h

11

Page 11
Image 11
Philips DCD778 Installation, Rear connections, Connecting FM antenna, Connecting TV antenna/CATV cables not included