Philips DCR 9001/02 A B

67

EN

7.1.3 Digital audio connections

Depending on your audio equipment,you have several options to connect your digital receiver.

CONNECTION (A)

Either

Connect the “SPDIF” digital audio output socket to the relevant input socket of your audio equipment using an optical cable (not

supplied).Consult the user manual of your audio equipment to locate the proper digital audio input. (1)

CONNECTION (B)

Or

Connect the audio “DIGITAL” output socket to the relevant digital audio input socket of your audio equipmentusing a single

CINCH cable (not supplied).Consult the user manual of your audio equipment to locate the proper digital audio input. (1)

(1) With either connection,you can only control the volume (up/down and mute) using your audio equipment remote control; refer to the user

manual of your audio equipment.To perform volume control using your receiver remote control,refer to the remote control user manual.

When using one of these digital audio connections,you may experience a de-synchronisation between sound and pictures

(Lip synchronisation).To restore synchronisation,change the Lip Synchronisation setting as described in paragraph 9.7.

7.2 Connecting to a video projector to watch Digital TV

7.2.1 Your video projector is only SDTV capable

Connect the “EXT1” SCART socket of your digital receiver to your video projector.

Video projectors are often fed with S-Video format video signals.If this is the case with your projector,follow the instructions

below for connection and installation:

- Connect a SCART/S-Video adapter to the “TV” SCART of your receiver (not supplied),and connect the adapter to the S-Video

input of your video projector by means of a S Video cable.

- Installation:refer to chapter 13.5.2 to change the “TV/VCR output” setting of your digital receiver to S-VIDEO/PAL-CVBS.

7.2.2 Your video projector is HDTV capable (YPbPr,DVI, or HDMI interface)

Connect the HDMI,DVI, or YPbPr socket of your digital receiver to the corresponding input on your video projector.

AB

Digital Audio equipment

Electrical

digital input

Optical

digital input

Cable Receiver

Contents

Main DCR 9001/02 Benutzerhandbuch EN DE User manual Foreword 50 EN *0.12 euros/min on the Deutsche Telekom Ltd.fixed network Contents EN Unpacking 1 Quick installation TV set Page 2 Meaning of symbols 3 Safety instructions 58 4 Product description Q W E R T Y O PU I 4.1 Front panel 4.2 Front panel display 4.2.1 Pictograms 4.2.2 Description of segment display messages 60 4.3 Rear panel Q TYI O P REW U P Page 6 Using your remote control when the STB mode is selected 0 TIMER 7 Connecting your digital receiver 7.1 Connections 7.1.1 Your TV set is HDTV capable (HD-Ready label) TV set TV set TV set 7.1.2 Your TV set is only SDTV capable TV set 7.1.3 Digital audio connections Cable Receiver 7.2 Connecting to a video projector to watch Digital TV 7.2.1 Your video projector is only SDTV capable A B Digital Audio equipment 8 First installation EN 8.1 Installation settings 8.2 Channel search 8.3 Search failure 9 Day-to-day operation 9.1 Switching your receiver ON, or to LOW POWER or STAND-BY 9.2 Switching from watching digital TV to listening to digital radio 9.3 Changing channels while watching digital TV or listening to digital radio 9.3.1 Using number keys of the remote control 9.4 PIN code 9.5 Banner 9.6 Volume control - / + / 9.7 Current programme options/Lip Synchronisation 9.8 Electronic Programme Guide (EPG) 9.9 Set or delete recording timers 9.9.1 Setting a timer in the EPG 9.9.2 Cancelling an active timer 9.10 Viewing teletext 9.11 Checking or changing the video output resolution setting 10 Premiere features 10.1 Premiere Multifeed 10.2 PREMIERE DIREKT 11 Premiere Menu 11.1 Menu tree 11.2 Menu navigation 11.2.1 Basics 11.2.2 Changing settings 11.2.3 Cancelling/storing changes 12 Premiere Menu EN 12.1 PIN Code Change 12.2 Smartcard 12.3 System 12.4 Scan 12.5 Display 12.6 Dolby Digital out of the digital audio output 12.7 Wake up 13 Settings EN 13.1 Timer Manager 13.2 Channel Manager 13.2.1 List Organization 13.2.2 List Editing 13.2.3 Channel Pool 13.3 Settings 13.3.1 Display options 13.3.2 Language options 13.4 For Parents EN 13.5 Advanced settings 13.5.1 TV Settings EN 13.5.2 System Settings 13.5.3 Time Settings 13.5.4 Factory Settings 13.5.5 Decoder Status 13.6 Channel Search Page 14 Advanced settings 14.1 Restoring factory settings 14.2 Changing the remote control setting 14.3 VCR or DVD recorder control 14.3.1 Connecting your equipment for Video/DVD Recorder Control TV set 15 Programming your remote control for your audio/video equipment brands 15.1 Mode selection (selecting the device you want to control) 15.2 Volume and mute control assignment 15.2.1 Default volume and mute control assignment 15.2.2 Changing the volume and mute control assignment 15.3 Changing the brand setting of your remote control for your TV, VCR, DVD or Amplifier 15.4 Controlling your TV,Video Recorder, DVD and amplifier 15.4.1 Using the remote control when the TV mode is selected 15.4.2 Using the remote control when the VCR mode is selected 15.4.3 Using the remote control when the DVD mode is selected 15.4.4 Using the remote control when the AMP mode (tuner/amplfier) is selected 16 Glossary Symptom Cause Remedy 17 Troubleshooting No sound or picture but the front panel displays the time or Symptom Cause Remedy 18 Technical specifications Page Code List fr verschieden Marken/Brand code list Setup-Code fr alle Verstrkermodelle (A) Setup Code For All Audio Amplifiers (A) Setup-Code fr alle Audio Verst./Tuner-Modelle (R) Setup Code For All Audio Amp/Tuners (R) Setup-Code fr alle TV-Gertmodelle (T) Setup Code For All TVs (T) Page Page Page Setup-Code-fr alle Videorecordermodelle (V) Setup Code For All VCRs (V) Page Page Setup-Code fr alle DVD-Playermodelle (Y) Setup Code For All Digital Video Disks (Y)