80
EN
To lock or unlock a particular channel:
1Scroll to the channel you want to lock or unlock.
2Press the yellow colour key to lock it.A mark appears, indicating that the
channel is locked.
3Alternatively,press the yellow colour key to unlock a locked channel.
4Repeat this operation as needed.
5Press EXIT to exit the screen.
13.3 Settings
Settings is used to set:
• Display options
• Language options

13.3.1 Display options

This screen is used to set display options according to your preferences.
- Select values for the following:
•Banner Duration:select a banner display duration, from 2 to 8 seconds using
the uor ikey.
•Banner Transparency:select On to enable banner transparency.
•Channel Number Input Latency:select the time lapse after which a number
key press is taken into account,from 1 to 5 using the uor ikey.
•Timer Warning Duration:select a banner display duration, from 15 seconds
to 5 minutes using the uor ikey.
•Front panel intensity in Standby:Lowor High
•Zoom factor applies on menu:from 1.0 (no zoom) to 1.2 (+20 % zoom)
- Press OK to confirm.

13.3.2 Language options

This screen is used to set language options according to your preferences.
- Select values for the following:
•On-Screen Language:select a language for on-screen display
•Audio Language:select your audio language
•Subtitles:select On,“If audio not available”,“Hard of hearing”fo r
special subtitles for deaf or Hard of Hearing viewers,or Off to disable subtitles.
•Subtitles Language:select subtitles language.
- Press OK to confirm.
13.4 For Parents
This screen is used to enable Parental Lock and change your receiver password.
The password is a 4-digit code used to lock channels and features of the receiver.This
code is different from the PIN code,which is a 4-digit code used to prevent access to
programmes not intended for persons under 18.
To enable Parental Lock:
- Select Yes to enable Parental Lock.
- Alternatively, select No to disable Parental Lock.
Additionally,you may modify your receiver password from this screen.
To modify your receiver password:
1Press the red colour key to access the Password Changefeature.
2Enter your current password.
If you have never changed your password,enter 1234 (factory setting).
3Enter your new password using number keys.Note that your password cannot be
made up of identical digits.
1911 must not be used as a password!
4Enter your new password again to confirm.
5Press EXIT.